Print Page - Avet HX hex-key size

Title: Avet HX hex-key size
Post by: Dan on March 14, 2010, 05:59:04 PM

Hi,

Maybe this is a silly question, but what size are the hex-key screws on the Avet HX? I have a minimal set of imperial-size keys. 5/64" is too small and 3/32" is too large.

The metric ones 3mm is too large and 2.5mm is too small (unless I'm put the keys in the incorrect place, I don't have anything handy to control meassure it).

Thanks

Title: Re: Avet HX hex-key size
Post by: alantani on March 14, 2010, 09:46:42 PM

hi, dan. so it has to be standard/imperial/sae. i think that 3/32 should fit. check the bit and the allen head screw for burrs. also, take a look at the picquic site. i have full sets of their 3 inch bits. they're great! alan

http://www.picquic.com/bitpac.html

Title: Re: Avet HX hex-key size
Post by: alantani on March 14, 2010, 10:07:12 PM

here's another source. http://www.firehawktech.com/products/Picquic_3_Power_Bits_in_Bulk-200-2.html

Title: Re: Avet HX hex-key size
Post by: Dan on March 15, 2010, 04:39:59 PM

fyi: 7/64" was the magic number that my crappy imperial set was missing :-)

Title: Re: Avet HX hex-key size
Post by: alantani on March 15, 2010, 04:44:59 PM

hmmmm...., i thought you said that 3/32nds (=6/64ths) was too large. ;D

Title: Re: Avet HX hex-key size
Post by: Dan on March 15, 2010, 04:59:53 PM

Indeed I did.. and that's what the key storage said it was.. guess it got replaces with some other key at some point :)

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Avet Tutorials and Questions => Topic started by: Dan on March 14, 2010, 05:59:04 PM