Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Senator Tutorials and Questions => Topic started by: barkley1956 on August 30, 2013, 09:14:02 PM

Title: to grease or not to grease 113H
Post by: barkley1956 on August 30, 2013, 09:14:02 PM
Hi All, I have two 113H reels opened and all cleaned up. What's the concensus on greasing under the inner and outer chrome side plates? These are not my reels and have no idea when they will be opened up again.

Thx! Jim
Title: Re: to grease or not to grease 113H
Post by: Ron Jones on August 30, 2013, 09:19:07 PM
I allways grease under the rings and then rub off as much as I can leaving a very thin layer. I feel it helps to preserve the ring itself.

Ron
Title: Re: to grease or not to grease 113H
Post by: Alto Mare on August 30, 2013, 09:30:34 PM
Quote from: noyb72 on August 30, 2013, 09:19:07 PM
I allways grease under the rings and then rub off as much as I can leaving a very thin layer. I feel it helps to preserve the ring itself.

Ron
Me too, very light with a brush.
Title: Re: to grease or not to grease 113H
Post by: Shark Hunter on August 30, 2013, 11:07:03 PM
I also do this. Cause Sal tells me to. ;D
(http://i1300.photobucket.com/albums/ag93/darondyer/IMG_2007_zps44c76826.jpg)
Title: Re: to grease or not to grease 113H
Post by: barkley1956 on September 08, 2013, 02:37:00 PM
Grease it is! Thank you
Text only | Text with Images