so ive been lookingat drag washers my daiwa sealine and alan said to use penn 114 washers, i look on ebay and i find 2 kinds of washers, they are both meant for penn 114's but uhhhh i guess u can say the donut hole in the drag washers are different sizes, why is this?? which one should i use?http://www.ebay.com/itm/Penn-Reel-114-Drag-Kit-Includes-Fiber-Washer-/171105716998?pt=LH_DefaultDomain_0&hash=item27d6b20b06
http://www.ebay.com/itm/Penn-carbon-drag-SENATOR-114-114L2-/121168588200?pt=LH_DefaultDomain_0&hash=item1c3635eda8
I surely am no expert but there is a Penn 114 and a Penn 114h. They are 2 different reels and among other parts take different drag washers. Since Alan did not specify 114h, I would assume that you need the drags from the 114. I am sure that someone with expertise on your reel will chime in with "reel" advice.
TomT
The drag washer size is the same for the 114 and 114H. It's still a 114, they just denote the change in manufacturing countries. It will work fine.
114 washers:
https://www.mysticparts.com/PennParts/Parts/6-114SP.aspx (https://www.mysticparts.com/PennParts/Parts/6-114SP.aspx)
114h washers:
https://www.mysticparts.com/PennParts/Parts/6-114HSP.aspx (https://www.mysticparts.com/PennParts/Parts/6-114HSP.aspx)
"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"
Quote from: jonathan.han on September 17, 2013, 02:04:37 AM
The drag washer size is the same for the 114 and 114H. It's still a 114, they just denote the change in manufacturing countries. It will work fine.
Are you sure about this.
the 114 is a black side plate low gear reel that uses #6-114 drags. the 114h is the red side plate high speed model that uses #6-115 drags. they are different.
From the man himself.
Ron
I thought I had this one covered with pictures and descriptions ::)...oh well ;D
the 114 drags have a smaller OD
Pcde123, are you referring to the 600 or 900?
Quote from: Alto Mare on September 17, 2013, 10:27:34 AM
I thought I had this one covered with pictures and descriptions ::)...oh well ;D
Me too with my question after your photos.
i was refering to the 50H, i think i have everything solved out thanks
Quote from: pcde123 on September 18, 2013, 02:57:36 AM
i was refering to the 50H, i think i have everything solved out thanks
I wish you would say who you are talking to. I hope your problem is solved.
Mike
Ah yes. Alan mentioned this to me today. It's the tiny washers in the 114 and the larger in the 114H. What can I say? I was a little brain dead after sleeping a half hour and then leaving for the harbor at 2 am on Sunday morning for an albacore run and getting back at 11pm smelling like straight tuna death! I slept for 13-14 hours and slept through my alarm I had set at 8am. I told Alan I'd help him move his daughter's stuff. I was comatose...apologies for the disinformation.
We all have our "D'oh" moments.
Quote from: Keta on September 18, 2013, 01:25:48 PM
We all have our "D'oh" moments.
too frequent for me tho...guess the brain is swiss cheese now...