Does anyone have a source for shims and spacers? I am always tinkering with lever drags to increase free spool but having problems sourcing materials. Lately I have been buying stainless finish washers, pounding them flat, and machining them myself, not fun or pretty.
I buy from Shimano if I know what reel has them or mcmaster carr.
My father was telling me they make some kind of ss shim material that you can Peel and trim to fit the radius and thickness that you need .he is looking in to it for me and I will post something when I find out.
Here you go:
http://www.mcmaster.com/#peel-away-shims/=p3ct0r
what size id do i need for the jigmaster and the 113h gear sleeve Thanks Sal
Excellent information on the peel away shims. Thanks!
Quote from: broschro on October 25, 2013, 07:47:36 PM
what size id do i need for the jigmaster and the 113h gear sleeve Thanks Sal
here is what I use for the 113h: part# 90902A221, 3/8"ID, 5/8"OD
these are not a perfect fit, but there is no need to be, they will still work.
For the Jigmaster, measure the bottom of the post and see what comes close to it, again, it doesn't need to be a perfect fit.