Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Senator Tutorials and Questions => Topic started by: BMITCH on December 09, 2013, 06:18:33 PM

Title: Another stupid question
Post by: BMITCH on December 09, 2013, 06:18:33 PM
I'm looking for the thread size on the 23-60 for the free spool lever (114H). Does anyone have a clue??
Title: Re: Another stupid question
Post by: Chris Gatorfan on December 09, 2013, 06:53:09 PM
Wish i could help but i am not sure. But always remember this when it comes to learning, THERE IS NO SUCH THING AS A STUPID QUESTION.
Title: Re: Another stupid question
Post by: Shark Hunter on December 09, 2013, 06:59:49 PM
I'm at a loss too Bob. I do know its the same as a 112H Handle nut. 249 too.
Title: Re: Another stupid question
Post by: Irish Jigger on December 09, 2013, 07:33:14 PM
It "looks" like 1/4-32 UNEF.  Taps and dies should be available.
BTW the 23-60 does not fit the 114H.
Title: Re: Another stupid question
Post by: BMITCH on December 09, 2013, 08:59:54 PM
Tom, the 23-60 is the eccentric screw. Ive got a really neat build going on right now and I need a longer eccentric jack screw. Thanks for the info
Bob
Title: Re: Another stupid question
Post by: Irish Jigger on December 09, 2013, 09:59:27 PM
Bob, yes of course I was thinking of the 23-60 "Screw Handle" which is used as the "Screw Eccentric" on the 114H. Anyway it appears to be  1/4-32 UNEF sorry for the confusion.
Tom.
Title: Re: Another stupid question
Post by: George4741 on December 10, 2013, 03:50:16 PM
Quote from: BMITCH on December 09, 2013, 06:18:33 PM

Does anyone have a clue??

Bob, I'm often clueless ;) but I bet a cup of coffee that it is 1/4NF28.  At least, that is what my measurements show.  

George
Text only | Text with Images