Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Avet Tutorials and Questions => Topic started by: sundaytrucka on December 15, 2013, 07:37:23 AM

Title: Older Avet LX...Worth Buying?
Post by: sundaytrucka on December 15, 2013, 07:37:23 AM
I found an older model avet LX and wanted to know if it would be worth buying. I heard they can have anti-reverse issues and bad bearings; so my concern is, can the anti-reverse mechanism be upgraded or would I be stuck with whatever comes in the reel?

It is the reel with a ledge on the sideplate, not the rounded sideplate, and has the shark emblem on it.

Thanks for any input.
Title: Re: Older Avet LX...Worth Buying?
Post by: Keta on December 15, 2013, 04:29:02 PM
The only AR issues I've seen were due to crud buildup from forcing dirt and salt into the reels with a hose when rinsing the reels.  The bearing issue is not that big of a deal if you,
#1 Set the drag with the reel in freespool
#2 Don't drop the reel with a load on the drag
#3 Don't fish the reel over it's designed drag range
#4 Replace the pinion bearing EVERY TIME you service the reel.

I keep a few pinion bearings in my travel kit.

I have several early Avets (pre glued on CF washer) and like them.
Title: Re: Older Avet LX...Worth Buying?
Post by: sundaytrucka on December 16, 2013, 07:22:27 AM
Ok, Cool. Thanks for the info Lee.

The person selling it says it is new, unused. I am hoping to get it for no more than $80, leaves me room to fix/upgrade any issues and still keep it in the good deal category.
Title: Re: Older Avet LX...Worth Buying?
Post by: LTM on December 16, 2013, 09:17:28 AM
Also see feedback from my concern on these reels: http://alantani.com/index.php?topic=8561.0

Leo
Title: Re: Older Avet LX...Worth Buying?
Post by: AJ on December 16, 2013, 05:12:16 PM
I have an older LX that is my "go to" 30# marlin reel.  It cast a mackerel a mile with great free spool and smooth drag, important when a 150# Marlin decides to go to Cabo.  Io caught 80# YFT at Guadalupe Island with this same reel.
Robb
Title: Re: Older Avet LX...Worth Buying?
Post by: sundaytrucka on December 18, 2013, 02:30:52 AM
Thanks for the link Leo.

I plan to use the reel on my 25# setup, may push it to 30# on another rod, but that would be max. I should know by this weekend whether it is mine or not. I have never been partial to Avet, but like the idea of having an old model.
Title: Re: Older Avet LX...Worth Buying?
Post by: LTM on December 18, 2013, 04:03:30 AM
Your welcome Sundaytrucka. I use my LX6/3 for 40# line with out any problems. I just wont push it past that.

Leo
Title: Re: Older Avet LX...Worth Buying?
Post by: sundaytrucka on December 24, 2013, 04:48:07 AM
I passed on the LX. We agreed on $80 but when I confirmed on closing the deal and coming to pick it up he changed it to $85. I had to pass, besides my ceiling being $80, the principle of somebody raising the price after a deal came to an accord...equals no deal from me.  

Thanks for the help anyway guys.
Text only | Text with Images