Hi all, looking for HT-100 OR Carbontex drag washers. need 6 of them.
Size O.D.>1.039 I.D.>.250 THK>.049
These are for 2 beach reels i am going over for surf fishing.
turboal, give Dawn a call. She can most likely help you out.
What's her phone # ?
smooooth drag
7578 braceo st
oak hills ca 92344
760-949-0271 www.smoothdrag.com
I talked to Dawn and she has nothing in close to that size.
Anybody with any ideas ????????????????????????
Turboal, you could try this one, it's from smoothdrag for a Shimano CT200
It's 1.051 OD
.502 ID
.042 thickness
Get a dremel and knock a little bit off the OD., the ID will be a little larger but that will not matter and your only about .007 less in thickness. Hope that helps....
The list of penn washers is measured in millimeters. If you have a moment to convert your dimensions, we might be able to find something.
Alan, I totally forgot your list of ht-100's. I just went and grabbed some washers out of the drawer and a set of calipers and measured a few. Yeah, metric is the way but standard is just click away.....
Hi, I went thru that list and none of them will work.
I guess i will have to buy some material and make them.
Hi all, Dawn says the closest match is from a Calcutta 700
1.065x.325x.044 they just need a little trimming on the o.d.
Hi all, just a note to tell everyone that Dawn at Smooth drag came
thru. she sent me the drag washers i could modify to fit my beach reel.
Surfs up at the Jersey shore and the strippers and big blues are running.
a 57+ lb stripper was caught last week.I think i need a BIGGER surf rod.