Text only | Text with Images

Reel Repair by Alan Tani

Welcome! => Beginner's Board => Topic started by: CaptainRMF on January 29, 2016, 03:35:10 PM

Title: 113HL Drag Stack
Post by: CaptainRMF on January 29, 2016, 03:35:10 PM
OK so I had a brain freeze. Putting my 113HLs back together with HT100 5 stack kit. Got it all done and realized I put the thick keyed washer on top of stack. Checked Scott's schematics and it shows thick keyed washer in middle of the stack. Does it make a difference or do I take them apart and start over ? Thanks.                Richy   
Title: Re: 113HL Drag Stack
Post by: Hook um on January 29, 2016, 04:08:20 PM
See Thread

http://alantani.com/index.php?topic=4255.msg32118#msg32118
Title: Re: 113HL Drag Stack
Post by: Tiddlerbasher on January 29, 2016, 04:15:44 PM
Leave it on top!
Title: Re: 113HL Drag Stack
Post by: CaptainRMF on January 29, 2016, 07:52:51 PM
Thanks Guys. Just left them the way they are. Don't feel any difference from them or the ones I haven't gotten to yet. Didn't think it mattered that much.                                                                                 Richy
Text only | Text with Images