What is the OD of a 13-18 spacer washer? My drawing got corrupted.
Keta
Do you mean 3-18 spacers? There are 2 thicknesses of these. If you want I could send you some that you cut for me. The Dia. fits through the hole in the side plate.
Mike
I'll get back to you Lee. I'll measure them up tonight.
If Lee does not have them in stock, I have them as well as 13-16 washers. both are 0.020" thick if I recall.
Yes, the spacer washer. I have a order to cut, I need the OD.
Lee
15.92 mm OD X 0.45 mm Thick this is the thin spacer
0.90 mm for the thick spacer
And for us SAE junkies, .622 OD. They made them .020, and they made them .045 (with a bend in the thick ones)
TW
Give me a break I don't know which measurements a machinist uses. I'm a retired Plumber. TW remember S.S.D.D.
Mike
Quote from: bluefish69 on July 05, 2016, 11:00:07 PM
Lee
15.92 mm OD X 0.45 mm Thick this is the thin spacer
0.90 mm for the thick spacer
Thanks Mike. I just got home and don't need to measure it now.
I can think metric, thanks Mike.
I will be cutting some in .020 (.508mm), and .035/.037 (.889mm/.940mm) Would there be a need for .045" (1.143mm)
Lee
Instead of putting in 2 thin spacers I use 1 thicker spacer. Then you can add a thin one if you like.
Mike