Reel Repair by Alan Tani

General Maintenance Tips => Pitfalls and Black Box Warnings => Topic started by: Dr. Jekyll - AKA MeL B on November 27, 2016, 05:28:20 PM

Title: NEVER...
Post by: Dr. Jekyll - AKA MeL B on November 27, 2016, 05:28:20 PM
LET A DECKIE WORK ON YOUR REEL WHEN HE OFFERS TO HELP  >:( >:( >:( >:( >:( >:(
Title: Re: NEVER...
Post by: bluefish69 on November 27, 2016, 05:45:13 PM
I've rebuilt Newell's on the way out in the Morning & still cooked in the Galley.


Mike
Title: Re: NEVER...
Post by: Dr. Jekyll - AKA MeL B on November 27, 2016, 05:49:30 PM
you are a different breed Mike!  :)

btw completely forgot you're a deckie...
Title: Re: NEVER...
Post by: alantani on November 27, 2016, 05:58:00 PM
you mean like this guy?   ;D

Quote from: WCFLA on January 25, 2014, 03:05:07 PM
Check this out. I laughed pretty good!

Regards,
Dan

http://youtu.be/yjgvMRlpqUY



Title: Re: NEVER...
Post by: David Hall on November 27, 2016, 06:01:28 PM
Ouch that one hurt, watching a nice penn senator fly overboard.  He would have benefited from this forum don't you think?
Title: Re: NEVER...
Post by: Dominick on November 27, 2016, 10:16:34 PM
It's a good thing there were no AT members on board they would have jumped in to save it.   :D ;D Dominick
Title: Re: NEVER...
Post by: Dr. Jekyll - AKA MeL B on November 27, 2016, 11:20:57 PM
Quote from: alantani on November 27, 2016, 05:58:00 PM
you mean like this guy?   ;D
no not that extreme, made laugh tho, but he saw me working on my 500N and i think he cranked the drag and now this part key #52 part #B-990 boss pinion bushing gets shove in too much and it locks. also he ruined the cam...dang! that !@@$$^& *(*(*) (&)(*%R#&_)*&*

at least I learned 2 things #2 found what else can cause the drag lever no too move... ;D :D ;) :)

I am actually more upset with myself...OH WELL!  ;D :D ;) :)
Title: Re: NEVER...
Post by: Bill B on November 28, 2016, 02:38:02 AM
That too bad brother.....hope you get it fixed.....now if we could clone Mike for all our trips ;D.....then let them fix the reel.....Bill
Title: Re: NEVER...
Post by: ez2cdave on December 14, 2016, 04:27:09 AM
Quote from: David Hall on November 27, 2016, 06:01:28 PM
Ouch that one hurt, watching a nice penn senator fly overboard.  He would have benefited from this forum don't you think?

That guy is an UTTER MORON . . . Alan could send him a WRENCH, but he might not know how to use it !!!
Title: Re: NEVER...
Post by: bluefish69 on December 14, 2016, 04:35:17 AM
If Alan sent him a wrench he would get hurt with it

Mike
Title: Re: NEVER...
Post by: broadway on December 23, 2016, 11:34:53 AM
Now I know why that guy didn't know how to work on his reel... he's on a sailboat, lol.
Dom
Title: Re: NEVER...
Post by: Alto Mare on December 23, 2016, 01:21:07 PM
You might be right Dom, he probably never got his hands dirty. :)
Still love the clip though.
Title: Re: NEVER...
Post by: Newell Nut on December 26, 2016, 03:30:28 PM
I laugh every time that I see that one. It takes a little bit of patience to tinker with reels.
Title: Re: NEVER...
Post by: Gfish on December 26, 2016, 06:44:43 PM
There should some kinda vidio award for Dieter, that really tickeled my twisted sense of humor. He stepped over a line that I've been tempeted by many times. ALRIGHT Dieter! That thing some guys here talk about applies: "get up and walk away", come back to it latter.
Gfish
Title: Re: NEVER...
Post by: Keta on December 26, 2016, 07:10:42 PM
It depends on the deckhand, I took apart an Avet and cleaned the AR system on the deck of a pitching boat using my Leatherman Tool when I was playing deckhand.
Title: Re: NEVER...
Post by: alantani on December 26, 2016, 07:23:13 PM
it would be nice if someone could track down dieter and let him know we're here!   ;D
Title: Re: NEVER...
Post by: Dr. Jekyll - AKA MeL B on December 26, 2016, 11:04:07 PM
how would you know beforehand if the deckie is able and capable? ask in the middle of a hot bite?

tight lines!
Title: Re: NEVER...
Post by: Porthos on December 27, 2016, 05:53:28 PM
The benefit of fishing with braid and enhanced drags...overlap coverage. Any one setup can go UP or DOWN 10lbs in line rating by just swapping out the top shot and adjusting to the corresponding drag.

Hence just taking a lineup of 20, 30, 40, 50, 60, and 80 lb setups covers 10, 15, 20, 25, 30, 40, 50, 60, 80, and 100 lbs. Significantly reduces the need to open up a reel out at sea...and reduces your odds of becoming the next "Dieter" or having some deckie wreck your reel.
Title: Re: NEVER...
Post by: Dr. Jekyll - AKA MeL B on December 27, 2016, 08:58:39 PM
Quote from: Porthos on December 27, 2016, 05:53:28 PM
swapping out the top shot and adjusting to the corresponding drag.
mine is better i just grab my other outfit and continue fishing. to prevent misunderstanding in the future the reel was never opened. and if my memory serves me well i think i'm one of the first to use this phrase "just in case", 2014 AT.com SOA...

tight lines!
Title: Re: NEVER...
Post by: fishmeluck on December 28, 2017, 12:59:27 AM
When a deckie has cleared your tangle, says "Here", and tries to hand you your rod, NEVER...say "Wait a sec."

Around Thanksgiving the guy fishing next to me said "Wait a sec." and watched as the deckie (anxious to get to work helping someone else, I'm sure) let go of the rod and his $400 rig went deep diving, including a brand new Penn Fathom LD 2 speed on its maiden voyage.  >:( words were spoken...
Title: Re: NEVER...
Post by: David Hall on December 28, 2017, 01:13:04 AM
Ouch that would hurt, I agree though those deckies are busy folks, if he says here you better be on it!
Title: Re: NEVER...
Post by: Swami805 on December 28, 2017, 01:19:49 AM
A RULE on a boat with a deckie is to say got it, Usually gone over in the galley on the way out with all the passengers when they're going over the safety and trip plan. No excuse for that for the deckie or the fisherman. That's on both of them
Title: Re: NEVER...
Post by: ez2cdave on December 28, 2017, 03:21:23 AM
I think THIS probably makes the NEVER list . . .

Tight Lines !

https://www.youtube.com/watch?v=wGpefY9JOH4 (https://www.youtube.com/watch?v=wGpefY9JOH4)
Title: Re: NEVER...
Post by: ez2cdave on December 28, 2017, 03:46:18 AM
Here is ANOTHER "Prime Candidate" for the NEVER List . . .

Tight Lines !

https://www.youtube.com/watch?v=SSvuMW_db1U (https://www.youtube.com/watch?v=SSvuMW_db1U)
Title: Re: NEVER...
Post by: ez2cdave on December 28, 2017, 03:49:15 AM
And LAST, but certainly NOT least . . .

Tight Lines !

https://www.youtube.com/watch?v=10PZ_0GK_bU (https://www.youtube.com/watch?v=10PZ_0GK_bU)
Title: Re: NEVER...
Post by: philaroman on December 28, 2017, 09:04:16 PM
I can beat that -- as far as incredibly stupid decisions, rather than accidents:
http://www.scubadivingphuket.net/scubadivingphuket/2010/03/17/moray-eel-attack-moray-bites-diver-and-eats-his-thumb/ (http://www.scubadivingphuket.net/scubadivingphuket/2010/03/17/moray-eel-attack-moray-bites-diver-and-eats-his-thumb/)
short version:
idiot scuba diver HAND-FEEDS the aquatic version of a wolverine  ::)
what does the moron REPEATEDLY choose as a tasty treat?  SAUSAGES!  :o
what do sausages look like?  THUMBS!!!   :'(
makes one wonder if his were opposable to begin with
Title: Re: NEVER...
Post by: ez2cdave on December 28, 2017, 10:20:59 PM
Quote from: philaroman on December 28, 2017, 09:04:16 PMmakes one wonder if his were opposable to begin with

While their "opposable" status is questionable, they were, most certainly, "digestable" . . . LOL !

I know they're probably "protected" but, if it were me, "Scarface" would have been "sleeping with the fishes" !

Tight Lines !
Title: Re: NEVER...
Post by: Swami805 on December 28, 2017, 11:02:32 PM
We were in Costa Rica for a few weeks. Miles of white sandy beaches so of course I'm fishing with a 9' graphite rod. Well there's lightning hitting not far from me and I'm thinking I'm the tallest thing around holding essentially a lighting rod in my hand. Time to hit the cabana for a cool one! Got lucky on that one but what does a guy from So Cal know about lightning? My wife ways viedoing it too,could have made this page.