Print Page - SHIMANO TLD 50 2 SPEED

Title: SHIMANO TLD 50 2 SPEED
Post by: dougwm10 on May 15, 2011, 04:54:35 AM

Hi

I need to strip down - service - and re-build my Shimano TLD50 2 speed reel and any help or advice with the procedures to follow would be greatly appreciated.

Is there a download available showing the steps to be taken and recommendations based on prvious experience.

Hope someone can help

Title: Re: SHIMANO TLD 50 2 SPEED
Post by: alantani on May 15, 2011, 07:21:45 AM

if you can familiarize youself with the tld 20/30II post and the tld 50 schematics, you will get through just fine. they are very similar. alan

Title: Re: SHIMANO TLD 50 2 SPEED
Post by: ohfishalee on April 13, 2019, 06:49:53 PM

Quote from: alantani on May 15, 2011, 07:21:45 AM
if you can familiarize youself with the tld 20/30II post and the tld 50 schematics, you will get through just fine. they are very similar. alan

What is the stock belleville washer sequence for the TLD50A?

Title: Re: SHIMANO TLD 50 2 SPEED
Post by: Tightlines667 on April 13, 2019, 07:16:39 PM

Quote from: ohfishalee on April 13, 2019, 06:49:53 PM
Quote from: alantani on May 15, 2011, 07:21:45 AM
if you can familiarize youself with the tld 20/30II post and the tld 50 schematics, you will get through just fine. they are very similar. alan

What is the stock belleville washer sequence for the TLD50A?

()(())|

BTW, I believe this is the same for the TLD 50A, TLD50WLRS, and Tiagra 50W

However, the Tiagra 50WLRS is (())(())|

I don't think the bellevilles changed between the 2 generations of each of these reels.

John

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Shimano Tutorials and Questions => Topic started by: dougwm10 on May 15, 2011, 04:54:35 AM