Reel Repair by Alan Tani

For Sale => Motive Fabrication => Topic started by: Three se7ens on August 13, 2017, 07:12:24 PM



Title: Titanium drag stars
Post by: Three se7ens on August 13, 2017, 07:12:24 PM
I have a few titanium drag stars available.  All are 2.5" diameter, 1/8" thick Sal's Stars, and can be had to fit fine thread Jigmasters, Newell 200-600's, and the 113H.  I have a total of 7 available, pricing as follows:

Fine thread Jigmaster - $23
Newell - $24
113H - $24

These were from a special run, and are not something I plan on keeping in stock.  So act fast if you want one.

Reply here to reserve yours, and I will PM you with payment info.



Title: Re: Titanium drag stars
Post by: Rothmar2 on August 13, 2017, 11:40:51 PM
I'll grab 1 fine thread Jigmaster for me thanks Adam.


Title: Re: Titanium drag stars
Post by: mhc on August 13, 2017, 11:58:56 PM
I'll take one of the jigmaster fine thread as well thanks Adam.
Mike


Title: Re: Titanium drag stars
Post by: PacRat on August 14, 2017, 10:10:19 AM
I'll take a 113H.
Thanks for the heads up!
Mike


Title: Re: Titanium drag stars
Post by: PacRat on August 14, 2017, 10:17:59 AM
Better put me down for a fine thread jigmaster too
Thanks


Title: Re: Titanium drag stars
Post by: Three se7ens on August 14, 2017, 02:03:00 PM
PM's sent.

Btw, these titanium stars weigh just 15 grams, while the stainless ones are 24 grams in this size. 


Title: Re: Titanium drag stars
Post by: JRD on August 15, 2017, 08:44:40 AM
I will take a jiggly star also


Title: Re: Titanium drag stars
Post by: Jeffro on August 15, 2017, 04:13:25 PM
113H would be great if available... Thx.


Title: Re: Titanium drag stars
Post by: Three se7ens on August 15, 2017, 06:14:48 PM
Only two left now. 


Title: Re: Titanium drag stars
Post by: vilters on August 16, 2017, 10:04:10 AM
Adam, let me know if a jigmaster or newell titanium star is available please. thanks, Steve


Title: Re: Titanium drag stars
Post by: Three se7ens on August 16, 2017, 11:17:16 AM
Adam, let me know if a jigmaster or newell titanium star is available please. thanks, Steve

 Both, or either. I don't cut the threads until after I receive an order.

Btw, the Newell and fine thread jigmaster stars are interchangeable.  The only difference is that I supply the Newell ones with a small spacer to keep the star from bottoming out on the side plate.  That spacer is also available separately.


Title: Re: Titanium drag stars
Post by: pompano joe on August 16, 2017, 12:14:15 PM
I'll take two for a 113H, Sal.  Just emailed you this morning.  Thanks!


Title: Re: Titanium drag stars
Post by: Three se7ens on August 17, 2017, 04:53:19 PM
One left!


Title: Re: Titanium drag stars
Post by: mitch27 on August 18, 2017, 06:24:16 AM
I'll take it for a 113H  and a titanium counter balance handle blank for a 113H  Thanks mitch27   PS(6mm hole)


Title: Re: Titanium drag stars
Post by: mitch27 on August 23, 2017, 04:58:06 AM
Thanks for making these, PayPal Info sent. mitch27


Title: Re: Titanium drag stars
Post by: Gman_WC on April 23, 2018, 09:03:27 AM
On the outside chance there are any Sal's stars left, I'll
take a jiggy and 113h please.

Thanks

-gary


Title: Re: Titanium drag stars
Post by: Caranx on May 18, 2019, 09:59:37 PM
Are you making any more drag stars for the 113H? In the thin style?
I am up for a couple.


Title: Re: Titanium drag stars
Post by: broadway on June 03, 2019, 01:33:13 PM
PM me your email addresses as I think I have a few of Sal stars and a couple others  in SS.
Dom


Title: Re: Penn handle blanks.
Post by: Eddy on June 15, 2019, 08:20:08 AM
Hi Adam,

Are you still making off-set handle blanks for Penn reels in s. steel and if so, do you produce one which would fit a Torque TRQ30LD2 lever drag reel? If you require the sleeve square hole size dimensions I can send them to you.

Derek.


Title: Re: Titanium drag stars
Post by: trickbag on November 19, 2019, 12:12:48 PM
I'd like to get a titanium drag star and an offset handle (3/16 hole) for a newell 300 series . If any are available. Thanks,Kyle


Title: Re: Titanium drag stars
Post by: Three se7ens on November 20, 2019, 07:27:14 PM
I'd like to get a titanium drag star and an offset handle (3/16 hole) for a newell 300 series . If any are available. Thanks,Kyle

There will be a lead time on any titanium parts as Ill have to order material.  Ill send you a PM when its ready to ship.



Title: Re: Titanium drag stars
Post by: Swami805 on November 20, 2019, 08:03:30 PM
I could use a few Newell stars too when the time comes. Thanks


Title: Re: Titanium drag stars
Post by: Three se7ens on November 21, 2019, 04:28:00 PM
Ill get some material on order. 


Title: Re: Titanium drag stars
Post by: JK47 on November 21, 2019, 08:03:31 PM
Count me in for a Newell star or 3, in 200, 300, and 500 sizes please.


Title: Re: Titanium drag stars
Post by: vilters on November 23, 2019, 12:41:39 PM
i also would like a couple newell stars when available. thanks