We have a new Tiburon Newell project underway, the N322XN, an extra narrow frame, spool and rod clamp kit that will fit any 300 series Newell reel (322, 332, 338 or 344). At 1 1/4" wide it is 3/8" narrower than the 322, and approximately half the width of the 2 7/16" 338. They are available in any of Tiburon's standard colors (red, purple, cobalt blue, electric blue, silver, black and dark green), and you can mix and match spool and frame colors. They are $129 plus $4.94 for shipping to anywhere in the USA. There are 35 kits available and they are scheduled for delivery during the last week of January or first week of February.
We will also be re-running a limited number of the extra narrow Jigmaster kit, the P21XN. Pricing, color information and delivery schedule is the same as the N322XN above (see photo of PJ's reel below - shown with Cortez Conversion's Jigmaster plates).
Please post your order on this thread is you would like one. If you already ordered kits on my Vintage Offshore Tackle forum, you do not need to confirm your order here. I will be sending PayPal invoices as soon as they are ready to pick up. If you would like to pay by check or money order, you can subtract 3%.
Thank you,
Randy
Hello Randy
I'm in for 1 red and 1 electric blue on the p21xn xnarrow jiggy.
Love this reel ... if the heating oil doesn't break the bank and you still have any in early January I'll be ordering 1 or 2 more.
This offering made my Christmas.
Bob
I've never owned a Newell reel and this seems like a good time to try one. Please put me down for one cobalt blue Newell kit.
Thanks, Randy!!!
Thank you Bob and thank you Darin!
Please add ne to the list for a black frame and spool.
Thanks
Mike
Quote from: PacRat on December 15, 2018, 01:39:11 AM
Please add ne to the list for a black frame and spool.
Thanks
Mike
Thank you Mike!
Randy
Hi Randy,
Just making sure you have me included from the other thread. Silver frame and silver spool Newell narrow kit. N322XN
Frank
Randy
I am interested in an all red P21XN. Thanks in advance, I am really looking forward to this project.
Rob
Quote from: rjones on December 15, 2018, 06:57:51 PM
Randy
I am interested in an all red P21XN. Thanks in advance, I am really looking forward to this project.
Rob
Thank you Rob. Your kit should be ready at the end of January. I just want to confirm that you want the Jigmaster kit, not the Newell.
Thanks again,
Randy
Quote from: Frank on December 15, 2018, 12:25:02 PM
Hi Randy,
Just making sure you have me included from the other thread. Silver frame and silver spool Newell narrow kit. N322XN
Frank
Thank you for confirming Frank. I do have you down for the silver Newell kit.
Randy
Quote from: Vintage Offshore Tackle on December 15, 2018, 07:52:10 PM
Quote from: rjones on December 15, 2018, 06:57:51 PM
Randy
I am interested in an all red P21XN. Thanks in advance, I am really looking forward to this project.
Rob
Thank you Rob. Your kit should be ready at the end of January. I just want to confirm that you want the Jigmaster kit, not the Newell.
Thanks again,
Randy
Randy,
That is correct I am looking for a Jigmaster kit
Randy,
Just curious if these are still going to happen the end of January or the begining of February?
Rob
Rob, Tiburon pushed the schedule for the P21XN and N322XN kits back to the first week of March. I am picking up the P16XN extra narrow Squidder kits and the P60WEX extra wide 114H 6/0 kits today.
Hey Randy,
When the N322XN kits are available please don't hold back from reminding me I need to pay you. So many transaction on this site I sometimes loose track of who I'm dealing with.
Thanks,
Frank
Randy,
Just curious if these are still going to happen the begining of March?
Rob
Quote from: rjones on February 25, 2019, 08:47:21 PM
Randy,
Just curious if these are still going to happen the begining of March?
Rob
Rob, I just checked with Tiburon and they moved the ETA back to mid-March due to a back up at their anodizer's shop. If you would like to cancel your order, I understand, and I am sorry for the delay.
Thanks,
Randy
Randy,
Absolutely not interested in canceling my order, really looking forward to putting this project together and putting it through it's paces on some red snappers.
Quote from: Vintage Offshore Tackle on February 25, 2019, 08:59:14 PM
Quote from: rjones on February 25, 2019, 08:47:21 PM
Randy,
Just curious if these are still going to happen the begining of March?
Rob
Rob, I just checked with Tiburon and they moved the ETA back to mid-March due to a back up at their anodizer's shop. If you would like to cancel your order, I understand, and I am sorry for the delay.
Thanks,
Randy
Even better so I can spend more at the FHS!
Any Newell 300 black/black available? Thanks
Quote from: tenderloin on February 27, 2019, 10:12:34 PM
Any Newell 300 black/black available? Thanks
I did order a few extra N322XN kits in black for stock. Do you want me to put you down for one of them?
Thanks,
Randy
Yes please...
Randy,
How is progress of the extra narrow jigmaster kit going?
Rob
Quote from: rjones on March 12, 2019, 10:45:29 AM
Randy,
How is progress of the extra narrow jigmaster kit going?
Rob
Good timing Rob! Tiburon just called so let me know that I can pick up the extra narrow Jigmaster and Newell kits on Tuesday next week.
For anyone who has ordered a kit, I would appreciate it if you would please send payment to arrive by then. If you need me to send you a PayPal or Square.com invoice, please let me know. if you would like to send the check or money order please send me a PM and I will send you my address. The kits are $129 + $4.94 for shipping by USPS first class parcel with tracking.
Still available are 10 black Newell N322XN kits and 4 P21XN Jigmaster kits in red.
Thank you,
Randy
Hello Randy
Send 2 square.com invoices each for 2 kits each, for a total of 4 kits.
Thanks
Bob
This is exciting, looking forward to my first Newell and I guess I'll have to get another JM XN as well ;D ;D ;D
Randy,
My kit arrived today and let me say it looks awesome put together with CC side plates, Pro Challenger crank arm, double dog bridge, and the JM 500X gear set. Topped off with an Alan Tani crank handle. Now to put some line on and find a suitable rod for such a beauty. She sure is a looker I'll try to get pictures posted this weekend.
Rob
Quote from: tenderloin on February 28, 2019, 05:14:52 PM
Yes please...
Kenneth, are you OK? I have been trying to reach you through PM, email and Facebook.
Hi. Are there any Newell kits left? Interested in a Chrome or Black and any if those are not available.
Quote from: Rocket Dog on May 08, 2019, 05:10:52 PM
Hi. Are there any Newell kits left? Interested in a Chrome or Black and any if those are not available.
Thank you for your interest. I met with Tiburon today and we are going ahead with a run of both the extra narrow (N322XN) and the extra wide (808) kits for the Newell 300 series. We expect to take delivery on the 808 kits in early July and the N322XN kits a few weeks later. Would you like to order a black N322XN kit? They are $129 plus $5.53 for shipping by USPS first class parcel with tracking. We will also be simultaneously running the same width kits for the Penn Jigmaster and Jigmaster HS.
Thank you,
Randy