Reel Repair by Alan Tani

Spinning Reel Rebuild Tutorials and Questions => D.A.M. Quick => Topic started by: basto on May 24, 2019, 09:24:13 PM

Title: A Nice 3001
Post by: basto on May 24, 2019, 09:24:13 PM
Well, I got myself a second 3001.  

(https://i1286.photobucket.com/albums/a601/george8322/P1050976_zpsun6ptuqp.jpg)
(https://i1286.photobucket.com/albums/a601/george8322/P1050973_zpsobseohfn.jpg)

 This one is in very good condition.
I went over it and the only thing I found that differed from my first one was the bottom of the spool cap.

(https://i1286.photobucket.com/albums/a601/george8322/P1050972_zpsln8jckbc.jpg)

The face that is raised about one eighth of an inch.

Still no cooling washer between the metal drag disk and the spool cap, as on the 5001. I guess the 3001 did not have this.

The drag washers are in good condition .

(https://i1286.photobucket.com/albums/a601/george8322/P1050971_zpsau8mte5b.jpg)

My new 3001 arrived with 8lb monofilament spooled. A bit like putting 15lb mono on your 113h., but the line capacity readings on the spool are from 8 to 20lbs.
I serviced the reel. All good inside and the bearing came off the pinion easily.

cheers
Basto

Title: Re: A Nice 3001
Post by: Alto Mare on May 24, 2019, 11:12:58 PM
Another nice one Greg, enjoy that reel.

Sal
Title: Re: A Nice 3001
Post by: basto on May 24, 2019, 11:29:07 PM
Hi Sal
I'm going to fish this one also, probably with 15 lb mono and I will be treating it like a baby.
Greg
Title: Re: A Nice 3001
Post by: happyhooker on May 25, 2019, 12:47:53 AM
Looks like a good example of a desirable reel.

Frank
Title: Re: A Nice 3001
Post by: basto on May 25, 2019, 03:42:11 AM
Yes Frank
For me its about as desirable as they come.
Greg
Title: Re: A Nice 3001
Post by: Darin Crofton on May 25, 2019, 06:18:53 AM
That's a beauty, Greg, great score!
Title: Re: A Nice 3001
Post by: basto on May 25, 2019, 09:05:15 PM
Hi Darin
Yes, I feel very lucky. They are not easy to come by.
Greg
Title: Re: A Nice 3001
Post by: Chuck750ss on May 27, 2019, 02:53:12 AM
Sweet!!!
Title: Re: A Nice 3001
Post by: Midway Tommy on May 29, 2019, 02:45:23 AM
Looks like you got a nice one there, Greg!
Title: Re: A Nice 3001
Post by: festus on May 29, 2019, 03:14:39 AM
Nice reel, Greg.  I saw a DAM Quick 3000 on ebay a day or two ago.  What's the difference in the two?  I don't know anything about those manufactured after the N models.
Title: Re: A Nice 3001
Post by: philaroman on May 29, 2019, 03:45:59 AM
mainly, anodizing:
00 = plain aluminum
01 = black-anodized
02 = graphite spool
Title: Re: A Nice 3001
Post by: Alto Mare on May 29, 2019, 11:04:50 AM
Quote from: festus on May 29, 2019, 03:14:39 AM
Nice reel, Greg.  I saw a DAM Quick 3000 on ebay a day or two ago.  What's the difference in the two?  I don't know anything about those manufactured after the N models.
Chester, there are some of these that have been broken down  so you could compare the design.
Just look around on this section so you could compare the 000 to the 001 and 002.

Mo has a nice tutorial on the 1000

As you know, with the exception of the spools,  these are pretty much of the the same design under the hood.

Sal