I'm trying to bring one back that's had an obvious hard life.
The bail trip lever was bent. How do you do that? I straightened it.
It also has a broken oscillator slide that I will need to source.
Also, the bail is tweaked good, but I can't tell where for sure, as I don't have another 265 to reference.
Could someone post some pictures of how their line roller aligns with the spool/rotor? I think that's where my problem is at.
Is this what you need, Balvar24?
Fred is THE MAN you need ;)
Quote from: festus on November 28, 2019, 03:22:48 PM
Is this what you need, Balvar24?
That helps. Have you got a picture "looking down the barrel" so to speak. Basically looking head on at the drag button?
When you figure out the parts you need for your 265 Microlite -- i have them available.
Lots of other knowledgeable folks on here when it comes to DAM Quicks --
And I also know them fairly well --
But parts availability is key -- and for Alan Tani members -- my DQ shop bins have that covered.
Best, Fred
Quote from: foakes on November 28, 2019, 04:14:35 PM
When you figure out the parts you need for your 265 Microlite -- i have them available.
Lots of other knowledgeable folks on here when it comes to DAM Quicks --
And I also know them fairly well --
But parts availability is key -- and for Alan Tani members -- my DQ shop bins have that covered.
Best, Fred
Thanks, I will certainly be in touch.
Quote from: Balvar24 on November 28, 2019, 04:02:35 PM
Quote from: festus on November 28, 2019, 03:22:48 PM
Is this what you need, Balvar24?
That helps. Have you got a picture "looking down the barrel" so to speak. Basically looking head on at the drag button?
Here ya go, I just now got back home. If you need any more, let me know.
One more.
Thanks Festus!
Happy belated Thanksgiving to everyone as well.