Going from a pflueger patriarch xt 30 $250 to a $25 okuma rox 20 hehe,,,,,, :D Big difference the weight is Twice as much and cranking was like climbing a rickety ladder,,,,the drag was jerky,,,,,,, :o "but that's ok"after taking it apart greasing,,,, with a little oiling here and there,,,, cal's grease on the filt drag washers it's not so bad,,,,,,,, ;D
if you get a chance, measure the inside and outside diameters of the felt drag washers and i'll send you some carbon fiber drags to replace them!!!! ;D
Bennie
I have a bunch of these
Switching out the drag mat makes huge improvement
After the upgrade u should use an electronic scale and set drag to 0.3555 lb
I feel ensuring accuracy to the 1000th decimal place is criticalis ;D
Nice reel, Alan, how thick are the CF washer your suggesting for that reel, cheers Don.
the penn #6-60 ht-100 washer usually works in these. i mostly need the outside diameter. it doesn't have to be exact.
Quote from: alantani on February 07, 2021, 05:07:28 PM
the penn #6-60 ht-100 washer usually works in these. i mostly need the outside diameter. it doesn't have to be exact.
Got this at horrible fake,,,,,, ;D
a set of penn ht-100 #6-155's will fit perfectly. three, right? i'll get them into the mail tomorrow.
Thank's my friend,,,,,,,, ;D