Hello,
I'm looking for recommendations for ultrasonic cleaners. What brand, size, features, etc.
Also, are there any parts typically found on a fishing reel that CANNOT be cleaned in this way?
Many Thanks,
John
https://alantani.com/index.php?topic=30684.0
This will give you some information, John —
Most anything can go into the ultrasonic cleaners —
However...
Type of solutions, time in the solution, bare metal, painted metal, plastics, Bakelite, carbon fiber — all have a learning curve based on experience and caution.
Still have the old L&R that I took in trade from a dental supply firm, over 20 years ago. Expected it to die — so I bought a 6 Quart SS unit on either eBay or Amazon. It is still in the box.
For one reel, I typically use 3 jars of solution — using Lacquer Thinner, Dawn HD Dish Soap, and Simple Green cut 50/50 with water.
Key is the solid state electronics & transducer power — plus a SS unit with no plastic reservoir.
Generally, the solutions can be reused, filtered, or added to about 5 or 6 times before refilling.
Best, Fred
Fred,
Thanks for this information. I thought about emailing you directly with this question but I think I've bugged you enough lately.
I checked out L&R cleaners. Pricey but they look really nice. I'll have to save up for one.
Thanks again,
John
I wouldn't have gotten a L&R either, John —
But it was part of a trade deal for some reel work from a local Dental Equipment Supply house.
The one I got as a backup is the one pictured above on eBay for $189 & free shipping.
I prefer manual analog dial controls as compared to digital push buttons. It is simpler and more durable for the long run.
Once you start using one — the quality, thoroughness, ease, and capabilit6 of your reel jobs will increase by perhaps 5 times — and be much easier.
These are not necessary — but they are a professional time-saver.
Best, Fred
Best, Fred
Fred,
You said "pictured above" but I don't see a photo anywhere. Am I overlooking something?
Thanks,
John
Fred,
There are a few used L&R units on EBay at a price that I can afford. I looked at new units from other manufacturers and they all get some bad reviews. It sounds like your well used L&R unit is reliable and solidly built. I don't really want by something that's inexpensive but not made to last.
John
Quote from: Altposaune on January 27, 2022, 04:06:32 PM
Fred,
You said "pictured above" but I don't see a photo anywhere. Am I overlooking something?
Thanks,
John
If you click on the link at the beginning of my response — it will open up a previous discussion plus a picture of an eBay offering that I purchased.
Best, Fred
Fred,
Got it! I'm still learning how to use the forum.
Thanks,
John
fyi bought a cheaper one at harbor freight to start. did not last long.
fyi to any thinking about harbor freighht models. not replacement parts available. trash when a problem pops up
The best value and least expensive tool —- is the one you don't need to replace.
Any experienced Pro, in nearly any line of work —- will tell us this.
Research, ratings, and recommendations —- will help in our selection of tools.
My L&R just gave up the ghost a month ago. I picked up one made in China with decent reviews for $125.
So far, it works about twice as effectively, and quicker than the L&R. Parts come out much cleaner, and require little in the way of additional cleaning afterwards.
We will see how well it lasts.
But honestly, if it only lasts 3 years instead of 20 —- it is well worth considering.
Best, Fred
I have one of the cheaper ones. Still going after 5 years