Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Shimano Tutorials and Questions => Topic started by: serviola on July 25, 2009, 06:45:11 AM



Title: Tiagra 30WLRSA, lost freespool
Post by: serviola on July 25, 2009, 06:45:11 AM
Hi Alan,
greetings to you from spain, and i wish you the best for the future. Things did not look so good on any place in the world. But every new step is also a new chance.

If there is now too much time to elimate, how it's looks like with a fishing session near barcelona. I promise, no fishing reel to repair, all stuff work well .... most time.

Alan, actually i have the problem, that the Tiagra 30 is blocked and did not give line.
It doesn't matter if the brake is closed or open, pre dial low or high.
It seems that the anti reverse has a problem?  ???
And not enough, some times it happens, and after turning the reel it's gone? ::) Yes this failures are my favorits.
Any idea where to look first?

In your tutorial to the Tiagra 12 i have seen the anti reverse sit on the left side. I think construction is nearly the same.

THX for input and see you at med sea on my boat ;)

Jürgen





Title: Re: Tiagra 30WLRSA, lost freespool
Post by: serviola on July 27, 2009, 04:13:56 AM
Hi Alan,

it is solved. One of the 4 mini screws of the clicker plate (on spool) was unlooked and blocked the turn in direction free spool.

THX


Title: Re: Tiagra 30WLRSA, lost freespool
Post by: alantani on July 28, 2009, 09:31:12 AM
see, if i wait long enough, you guys figure these things out on your own.  my evil plan is working!!!!!   ;D ;D ;D ;D ;D