bearing dimensions - updated 9/14/2010

Started by alantani, September 15, 2010, 04:28:15 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

alantani

bearing list - updated 9/14/2010

this is a list of all the bearings i have ever come across while working on reels.  it you service reels in a shop or as a hobby, print out this list and consider maintaining a minimum inventory of each of these sizes.  if you are working on a reel and you need a bearing, you an always go to penn, shimano, daiwa, okuma, etc., for a bearing specific to that reel.  you can also go to anyone of several places like boca or smooth drag and order them up.  just as a point of reference, i've listed metric and inch bearings by ID x OD x HT, then the boca bearings part #, then the ABEC rating, and then the boca bearings price.  if there is no abec number listed, then assume that it is ABEC-1.  all of the bearings are stainless steel.  the "ZZ" indicates that the bearing has stainless steel shields.  

ceramic bearings - you all probably know that i am not a big fan of ceramic bearings.  before you toss your stainless steel abec-5's, i would recommend cleaning your stainless bearings with carb cleaner and compressed air, then lube them with your performance grade lube of choice, and them see how they perform.  if the performance is not up to snuff, consider another bearing.  once you get your stainless steel abec-5's clean out and properly lubed, i think you will find them to be just as fast, and much quieter.

abec 7 bearings - sometimes you can have too much of a good thing, and tighter tolerances are not always good.  i consider that to be the case with abec-7 bearings.  i prefer the looser tolerances and lower prices of stainless steel abec-5 bearings.

avet bearings - special mention should be made here.  avet buys a very inexpensive bearing for their reels and passes on that savings to their customers.  bearings are generally $5 each.  that is good and, um, bad.  if you burn through bearings quickly, stick with avet bearings and save some money.  if you keep your reels well maintained, consider upgrading your bearings with something a little higher in quality.  the last time i ordered a dozen bearings from avet. every one of them had some damage to then.  i still have that bag for display purposes.  

here's the list.  

metric

3 x 8 x 4 SMR693-ZZ #5 $9
3 x 10 x 4 SMR103-ZZ #5 $8
4 x 7 x 2.5 SMR74-ZZ #5 $9
4 x 8 x 3 SMR84-ZZ #5 $12
4 x 10 x 4 SMR104-ZZ #5 $8
4 x 11 x 4 SMR694-ZZ #5 $12
5 x 8 x 2.5 SMR85-ZZ #7 $8
5 x 9 x 3 SMR95-ZZ #5 $9
5 x 10 x 4 SMR105-ZZ #5 $9
5 x 11 x 3 SMR685 #1 OPEN $7
5 x 11 x 4 SMR115-ZZ #5 $9
5 x 11 x 5 SMR685-ZZ #5 $8
5 x 16 x 5  SMR625-ZZ #3  $11
6 x 10 x 3 SMR106-ZZ $7
6 x 12 x 4 SMR126-ZZ #5 $9
6 x 13 x 3.5 SMR686 #5 $9
6 x 13 x 5 SMR686-ZZ #5 $12
6 x 15 x 5 SMR696-ZZ #1 $9
6 x 17 x 6 SMR606-ZZ #1 $11
6 x 19 x 6 SMR626-ZZ $12 avet
7 x 13 x 4 SMR137-ZZ #5 $9
7 x 14 x 3.5 SMR147 #1 $12
7 x 14 x 5 SMR697-ZZ #5 $12
7 x 17 x 5 SMR697-ZZ #5 $12
7 x 19 x 6 SMR607-ZZ #3 $14
7 x 22 x 7 SMR627-ZZ #1 $12
8 x 12 x 2.5 SMR128(X) $9
8 x 12 x 3.5 SMR128-ZZ #5 $9
8 x 13 x 4 SMR138-ZZ #5 $12
8 x 14 x 3.5 SMR148 $9
8 x 14 x 4 SMR148-ZZ #5 $9
8 x 16 x 5 SMR688-ZZ #5 $9 avet
8 x 19 x 6 SMR698-ZZ #1 $11
8 x 22 x 7 SMR608-ZZ #5 $22
9 x 17 x 4 SMR689 #1 $12
9 x 17 x 5 SMR689-ZZ #5 $12
9 x 20 x 6 SMR699-ZZ #3 $13
10 x 15 x 3 No Boca Number $14
10 x 15 x 4 SMR6700-ZZ #3 $14
10 x 19 x 5 SMR6800-ZZ $16
10 x 20 x 5 SMR2010-ZZ $18
10 x 20 x 6  SMR2010-ZZ/W6  $18
10 x 22 x 6 SMR6900-ZZ #1 $17
10 x 26 x 8 SMR6000-ZZ #1 $20
12 x 18 x 4 SMR6701C-YZZ AF2 $10
12 x 21 x 5 SMR6801-ZZ #3 $22 avet
12 x 22 x 5 Daiwa #B18-1601 $15
12 x 24 x 6  SMF6901-ZZ #3  $14

inch

0.125 x 0.250 x 0.1094 SR144ZZ #7 $8
0.125 x 0.375 x 0.156 SR2-ZZ #3 $7
0.125 x 0.500 x 0.172 SR2A-ZZ #1 $7
0.1875 x 0.3125 x 0.125 SR156-ZZ #7 $8 avet
0.1875 x 0.375 x 0.125 SR166-ZZ #7 $8
0.1875 x 0.500 x 0.196 SR3-ZZ #3 $7.25
0.1875 x 0.6875 x 0.250 SR1601-2RS LGF $10
0.250 x 0.625 x 0.196 SR4-ZZ #3 $8
0.312 x 0.500 x 0.1562 SR1810-ZZ #3 $9 avet
0.375 x 0.625 x 0.1562 SR1038-ZZ #3 $11 avet
0.375 x 0.875 x 0.2188 SR6 #3 $12
0.375 x 0.875 x 0.2188 SR6-ZZ $7 Avet
0.500 x 0.875 x 0.2812 No Boca Number $17
0.500 x 0.875 x 0.3125 SR6-5ZZ#3 $17
0.500 x 1.125 x 0.3125 SR8-ZZ #1 $20
send me an email at alantani@yahoo.com for questions!

Bub B.

I have been measuring all the bearings in the reels I have in mm. When or on what make of reel should you measure in inches?  Or does it matter?

Dawn

Hi
The American made reels often use bearings in inches.  OR if in doubt measure in mm, if it doesn't come out even, like 10mm or 10.5mm it's probably an inch bearing.

Dawn
Dawn

wallacewt


Dawn

#4
Below is what I stock.  All are Abec 5, except where noted, there are a couple of #7

3 x 8 x 4  SMR693-ZZ              Ceramic Hybrid #5 & 7 and Stainless
3 x 10 x 4  SMR103-ZZ               Ceramic #5 & 7 and Stainless
4 x 10 x 4   SMR104-ZZ             Ceramic and Stainless
4  x 11 x 4  SMR694-ZZ            Stainless
5 x 9 x 3  SMR95-ZZ                  Ceramic and Stainless
5x11x3                                              Stainless
5 x 11 x 4  SMR115-ZZ              Ceramic #5 & 7 and Stainless
6 x 12 x 4  SMR126-ZZ                Stainless
7 x 14 x 5  SMR697-ZZ             Stainless
7 x 17 x 5  SMR697-ZZ             Stainless
8 x 12 x 3.5  SMR128-ZZ             Will stock soon
8 x 14 x 4  SMR148-ZZ            Stainless
8 x 16 x 5  SMR688-ZZ       Stainless
8 x 19 x 6  SMR698-ZZ             Stainless
9 x 17 x 5  SMR689-ZZ          Stainless
9 x 20 x 6  SMR699-ZZ            Stainless
10 x 22 x 6   SMR6900-ZZ       Stainless
10 x 26 x 8  SMR6000-ZZ          Stainless
4x7x2   Stainless
4x8x3    Stainless
5x8x2   Stainless
6x13x5   Stainless



inch


0.125 x 0.375 x 0.156   SR2-ZZ        Ceramic or Stainless
0.1875 x 0.3125 x 0.125  SR156-ZZ       Stainless
0.1875 x 0.375 x 0.125  SR166-ZZ     Ceramic or Stainless
0.1875 x 0.500 x 0.196  SR3-ZZ       Stainless
0.250 x 0.625 x 0.196  SR4-ZZ    Stainless
0.375 x 0.625 x 0.1562  SR1038-ZZ   Stainless

Dawn
Smoooooth Drag

Dawn

alantani

i think we should set up a separate board here just for dawn and smooth drag products.  alan
send me an email at alantani@yahoo.com for questions!


Dawn

Dawn

broadway


Roger

Roger

"Twenty years from now you will be more disappointed by the things you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover."   Mark Twain

Bryan Young

I agree.  Dawn!  Dawn!  Dawn!  Dawn!  Dawn!  Dawn!  Dawn!  Dawn!
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

alantani

Quote from: Dawn on September 17, 2010, 12:35:57 AM
Wow, I would feel so special   ;D

Dawn

i'll take that as a yes.  you have a pm.
send me an email at alantani@yahoo.com for questions!

yockman

Hi guys,

Interesting post here.

Re the ABEC rating, what do you think is the lowest rating needed for a reels such as a TLD 25?

Yockman

Keta

Quote from: Dawn on September 17, 2010, 12:35:57 AM
Wow, I would feel so special   ;D

Dawn

You have earned it, I'm always happy when I need to make an order with you.
Hi, my name is Lee and I have a fishing gear problem.

I have all of the answers, yup, no, maybe.

A man who carries a cat by the tail learns something he can learn in no other way.
Mark Twain

fishhawk