alan tani @ alantani.com fishing reel repair rebuild tutorial Daiwa Sealine 600H 5+1 Drag Kit - $28 shipped in USA
Reel Repair by Alan Tani
August 19, 2019, 06:31:20 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1] 2   Go Down
  Print  
Author Topic: Daiwa Sealine 600H 5+1 Drag Kit - $28 shipped in USA  (Read 17247 times)
0 Members and 1 Guest are viewing this topic.
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10184


The Reel Whisperer


« on: October 26, 2014, 05:06:04 PM »

Remember my original drag washer kit for the Daiwa Sealine 600H?


As you recall, these new drags deliver a smooth 25#'s of drag easily with a max of 35#-37#.  Beats the stock drags delivering a sticky 15-20#'s of drag.

I just received an older 600H and this is what I had found.

If you noticed, the older reel's gear has a center lip in the main gear like man of the Sealine Series reels.

If you still could not see it, I've installed carbon fiber drag washers to help you see the difference.

Therefore, my new kit will have one of the carbon fiber drag washers where the inside diameter enlarged to accommodate the older 600H reels.  This will not affect the drag range of these reels one bit.

As many have told me, why not do a tutorial to grind the center lip, and I shared that I didn't want to do this because there may be fisherman/woman out there that may not have access to grinding tool and therefore I wanted my kits to be drop in kits.  So here's the new kit.



It contains the following:

     1 - Under-gear dimensionally modified Penn HT-100 carbon fiber drag washer
     1 - First in-gear dimensionally modified Penn HT-100 carbon fiber drag washer (ID enlarged as explained above)
     4 - In-gear Penn HT-100 carbon fiber drag washer
     2 - Thin, hard stainless steel keyed metal washers
     1 - Thin, hard stainless steel eared metal washers

Like the original kit, you will still need to use one eared and one keyed washer from the original drag stack.

The cost of the new drag kit is $28 shipped in the USA.  International orders will incur actual shipping charges.

Please PM me here or send me an email to Ultimate.Upgrade@yahoo.com.

Thank you.
Bryan
« Last Edit: February 10, 2015, 10:11:37 PM by Bryan Young » Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Nojiri
Member
*
Offline Offline

Posts: 4


Aloha!


« Reply #1 on: November 03, 2014, 05:58:06 PM »

Hi Bryan,

Thanks for letting us know.  I just Sent you a PM.

Nojiri
Logged
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10184


The Reel Whisperer


« Reply #2 on: November 03, 2014, 11:18:14 PM »

Hi Bryan,

Thanks for letting us know.  I just Sent you a PM.

Nojiri
Aloha Nojiri,

I responded to your PM. 

Mahalo,
Bryan
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
fsrmn
Firearms Group
Member
**
Offline Offline

Posts: 288



« Reply #3 on: November 07, 2014, 06:49:27 PM »

 I got the drag kit installed...almost Huh? My friend, who I ordered the 2nd kit for, used the original thin keyed washer last and is happy with the drag performance. I used the thick keyed washer and it seems to work as well? Also... My 3 yr old granddaughter was helping me and mixed up the 3 tension washers  Undecided so I'm not sure if I got them in right. 2 thin, 1 thick. Cup in on the 1st thin one against the thick eared one, then cup out on the second thin one, then cup in on the thick one against the collar. At least it seems to work that way Undecided. The kit works great! Tied the line to my Schnauzer's collar and threw a dog treat and stopped her mid leap Shocked Can't wait to try it out on a big fish.
Logged

Not all fishing is done with rod and reel.
Shark Hunter
Moderator
Member
****
Offline Offline

Posts: 11091


The Rogue of the Seven Seas!


« Reply #4 on: November 07, 2014, 08:57:22 PM »

Very Nice Bryan! Way to adapt and make a plug and play drag kit. Wink
I'll take a set for my 600. You can throw in those 114H ss sleeves as well.
Thanks
Logged

Life is Good!
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10184


The Reel Whisperer


« Reply #5 on: November 08, 2014, 08:31:37 AM »

I got the drag kit installed...almost Huh? My friend, who I ordered the 2nd kit for, used the original thin keyed washer last and is happy with the drag performance. I used the thick keyed washer and it seems to work as well? Also... My 3 yr old granddaughter was helping me and mixed up the 3 tension washers  Undecided so I'm not sure if I got them in right. 2 thin, 1 thick. Cup in on the 1st thin one against the thick eared one, then cup out on the second thin one, then cup in on the thick one against the collar. At least it seems to work that way Undecided. The kit works great! Tied the line to my Schnauzer's collar and threw a dog treat and stopped her mid leap Shocked Can't wait to try it out on a big fish.

The order should be fine.  I chose the order to best fit the main gear.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
alantani
admin
Administrator
Member
*****
Online Online

Posts: 17534



« Reply #6 on: November 10, 2014, 08:57:37 PM »

Hi Bryan,

Thanks for letting us know.  I just Sent you a PM.

Nojiri

welcome!!!!!!
Logged

send me an email at alantani@yahoo.com for questions!
Shark Hunter
Moderator
Member
****
Offline Offline

Posts: 11091


The Rogue of the Seven Seas!


« Reply #7 on: November 10, 2014, 09:03:35 PM »

Yes,
A Big Welcome to you Nojiri! Grin
Enjoy your stay Buddy! Wink
Logged

Life is Good!
js1172
Firearms Group
Member
**
Offline Offline

Posts: 45



« Reply #8 on: November 11, 2014, 03:06:12 AM »

Got my kits, thanks bryan, will install them when I service my reels after deer/bear  season during the long, slow, dragged out winter months of Jan./Feb.
js
Logged

Our houses are protected by the good lord and a gun, ya might meet them both if ya show up here not welcome son
way out here/Josh Thompson
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10184


The Reel Whisperer


« Reply #9 on: November 11, 2014, 08:38:40 AM »

Great.  Thanks for letting me know.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Nojiri
Member
*
Offline Offline

Posts: 4


Aloha!


« Reply #10 on: January 29, 2015, 10:28:15 PM »

welcome!!!!!!

Yes,
A Big Welcome to you Nojiri! Grin
Enjoy your stay Buddy! Wink

Thank you very much, alantani and Shark Hunter!  I feel very welcomed  Smiley.  I really appreciate all the help you guys give.  I just got back in country with my Ultimate Drag kit, so am about to do the upgrade.  I just heard that blue marlin are starting to show up here in Okinawa, so I'm hoping I can test out the drag kit on one  Grin .  Also heard that the other day, what they think was a big bluefin spooled a 50W with 1,100 meters of line on full drag.  Must not have had an Ultimate Drag kit on it  Wink

Cheers!
Nojiri
Logged
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10184


The Reel Whisperer


« Reply #11 on: January 30, 2015, 03:22:22 PM »

Thanks Nojiri.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Nojiri
Member
*
Offline Offline

Posts: 4


Aloha!


« Reply #12 on: January 30, 2015, 07:26:24 PM »

Thanks Nojiri.

Bryan,
Completed the drag upgrade, and now it is soooo much smoother.  Grin
Thanks!
Nojiri
Logged
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10184


The Reel Whisperer


« Reply #13 on: January 30, 2015, 09:08:41 PM »

Thanks Nojiri.

Bryan,
Completed the drag upgrade, and now it is soooo much smoother.  Grin
Thanks!
Nojiri
I cannot take all of the credit.  The credit goes to Penn for the HT-100 carbon Fiber washers and to whom ever discovered Stainless steel.  I just took it to another level for these great reels.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Shark Hunter
Moderator
Member
****
Offline Offline

Posts: 11091


The Rogue of the Seven Seas!


« Reply #14 on: January 31, 2015, 11:56:04 AM »

I see that same lip on Big Senator Gears. Its not an issue with the loose tolerance of the Ht-100's on these.
Logged

Life is Good!
Pages: [1] 2   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.894 seconds with 16 queries.