alan tani @ alantani.com fishing reel repair rebuild tutorial Penn 110 1/0 (The Mini Tank)
Reel Repair by Alan Tani
October 15, 2019, 04:54:13 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 [2] 3 4 5   Go Down
  Print  
Author Topic: Penn 110 1/0 (The Mini Tank)  (Read 29608 times)
0 Members and 2 Guests are viewing this topic.
Tiddlerbasher
Photo Group
Member
**
Online Online

Posts: 2724



« Reply #15 on: October 30, 2014, 07:25:16 AM »

Lovely job - Almost too nice to fish Wink
Logged
fIsHsTiiCkS
Member
*
Offline Offline

Posts: 882



« Reply #16 on: October 30, 2014, 09:34:47 AM »

Just a perfect reel --

Both for the parts that obviously show -- and more importantly, what doesn't show under the hood.

Colors are pretty -- but my vote always goes to a silver frame -- it matches the metal on the reel already -- and after 100 fishing trips -- will still look like new.

Great thought went into this tough little tank.

Thanks for sharing!

Best,

Fred



Thanks Fred I appreciate the kind words!

Did you put SS screws in the reel?Huh?

Mike

No its the stock screws but ss screws arent a bad idea! Also would love to get an ss yoke for this Little Tank. Few more things I might still do to it.
Logged
bluefish69
Member
*
Offline Offline

Posts: 2112


Just West of J.F.K. Airport N.Y.


« Reply #17 on: October 30, 2014, 10:05:07 AM »

I did the SS screws on my 99. All that's around is flat head screws. I cut my screws to length & put the screws in the Dramel ground the heads a little thinner then normal using a Diamond Stone. Using the same Stone with the screw in it hold the Dramel at about a 45* angle & grind the head of the screw to your liking. They look nice this way & they are flush with the ring.

Mike
Logged

I have not failed.  I just found 10,000 ways that won't work.
fIsHsTiiCkS
Member
*
Offline Offline

Posts: 882



« Reply #18 on: November 10, 2014, 05:08:16 PM »

I did the SS screws on my 99. All that's around is flat head screws. I cut my screws to length & put the screws in the Dramel ground the heads a little thinner then normal using a Diamond Stone. Using the same Stone with the screw in it hold the Dramel at about a 45* angle & grind the head of the screw to your liking. They look nice this way & they are flush with the ring.

Mike

Mike you got me real interested in the SS screws after a little looking a found some nice ss screws! These were made originally for newell reels, but or an almost direct drop in due to the tib frame.

This is the ss screw and original side by side. The ss screw is just slightly longer and the great thing is it already has the 45 degree angle on the screw head.


The orginal screw have a rounded head like this.


Now with the ss screws in! Looks sweet and of course each screw is still greased



Also added a ss arm and new handle.


Now if I can just get someone to cut me an ss yoke lol. When is Lee back!
Logged
bluefish69
Member
*
Offline Offline

Posts: 2112


Just West of J.F.K. Airport N.Y.


« Reply #19 on: November 10, 2014, 07:35:56 PM »

The Newell Screws are called Oval Head. The screws that I worked with are called Flat Head. You can get all the Flat Head SS Screws that you want at McMaster & Carr but Oval Head are hard to find in mass.

Mike
Logged

I have not failed.  I just found 10,000 ways that won't work.
fIsHsTiiCkS
Member
*
Offline Offline

Posts: 882



« Reply #20 on: November 11, 2014, 10:51:09 AM »

The Newell Screws are called Oval Head. The screws that I worked with are called Flat Head. You can get all the Flat Head SS Screws that you want at McMaster & Carr but Oval Head are hard to find in mass.

Mike

I found mine at uluajunkies.com they have them in 3/8 and 3/4 size.
Logged
basto
Member
*
Online Online

Posts: 1071



« Reply #21 on: November 24, 2014, 06:08:19 PM »

WOW!!! what a beautiful, solid looking little reel.....much nicer than any jig master because of the double rings and stronger attachment of the side plate to the frame. Never did like the turnkey type on the jig masters and squidders (just my taste)
Congratulations on a great job.
Basto
Logged
fIsHsTiiCkS
Member
*
Offline Offline

Posts: 882



« Reply #22 on: November 24, 2014, 11:31:46 PM »

WOW!!! what a beautiful, solid looking little reel.....much nicer than any jig master because of the double rings and stronger attachment of the side plate to the frame. Never did like the turnkey type on the jig masters and squidders (just my taste)
Congratulations on a great job.
Basto

I know what you mean! I had a thumb screw on a jigmaster break on me while hooked into a yft! So I definitely feel more confident with the double rings! Thanks for the kind words!
Logged
coastal_dan
Green Firefish, Anchor of the Oceans!
Sensei
Member
***
Offline Offline

Posts: 1530



« Reply #23 on: February 02, 2015, 09:31:09 AM »

Awesome!  This little guy would be a killer Tog and Trigger reel for a kayak.  Nice job sir.
Logged

Dan from Philadelphia...

Where Land Ends Life Begins...
Lowprofile
Member
*
Offline Offline

Posts: 176


« Reply #24 on: August 11, 2015, 03:31:43 AM »

awesome!

after seeing this I just put in bids for two 1/0's on ebay. marked the spools and frames so if I win I can buy them too. will be fun to do them this winter. thinking they will make nice trolling reels for kings on the kayak.
Logged
Rancanfish
Member
*
Offline Offline

Posts: 1724


« Reply #25 on: August 21, 2015, 09:03:52 PM »

Well I finished mine tonight.  This is my second 1/0 ever, since I had zero luck about 10 years ago on an Ebay project.  We didn't have the upgrades and finding parts was rough. So I sold it. Anyway.....

I bought this one off Ebay since it looked a lot cleaner in pics.  So right away I dropped in Bryan's 5 stack, an anniversary spool and a new-old-stock AccuFrame from Randy.  Then I noticed the out side ring screws were sitting a bit high. So I then realized someone had put this thing together with an inside ring, on the outside, and it doesn't have a taper to the holes so the screws sit flush. So MysticParts.com to the rescue. I then figured I might as well get the SS sleeve too. Then the work started.  I couldn't get the new SS pin in so I started filing away on the post. Still had a bit of a problem as I mushroomed the pin driving it in. Back to the brass pin that dropped right in, hmmm.
 Then I fit one of the Chui spacers to the side plate, but it wouldn't fit over the new sleeve.  Get out the round file,(no not the trash can), and filed away until it dropped on barely snug. Yay.
 Then I put it back together and noticed my star hits the oil port, hmm.  No longer spacers available so I raided my stash of Bryan's thin washers, put it under the star and voila! She's clicking and purring. Now as soon as my larger star gets here it'll be complete.


"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"
« Last Edit: August 11, 2018, 08:19:42 AM by mizmo67 » Logged

Can't sleep, clowns will eat me.
David Hall
Firearms Group
Member
**
Online Online

Posts: 3455



« Reply #26 on: August 21, 2015, 10:38:32 PM »

Well I finished mine tonight.  This is my second 1/0 ever, since I had zero luck about 10 years ago on an Ebay project.  We didn't have the upgrades and finding parts was rough. So I sold it. Anyway.....

I bought this one off Ebay since it looked a lot cleaner in pics.  So right away I dropped in Bryan's 5 stack, an anniversary spool and a new-old-stock AccuFrame from Randy.  Then I noticed the out side ring screws were sitting a bit high. So I then realized someone had put this thing together with an inside ring, on the outside, and it doesn't have a taper to the holes so the screws sit flush. So MysticParts.com to the rescue. I then figured I might as well get the SS sleeve too. Then the work started.  I couldn't get the new SS pin in so I started filing away on the post. Still had a bit of a problem as I mushroomed the pin driving it in. Back to the brass pin that dropped right in, hmmm.
 Then I fit one of the Chui spacers to the side plate, but it wouldn't fit over the new sleeve.  Get out the round file,(no not the trash can), and filed away until it dropped on barely snug. Yay.
 Then I put it back together and noticed my star hits the oil port, hmm.  No longer spacers available so I raided my stash of Bryan's thin washers, put it under the star and voila! She's clicking and purring. Now as soon as my larger star gets here it'll be complete.

Pictures pictures pictures,  how can I be expected to vicariously live through these great projects without the visuals? Now you have to tear it down and take pictures putting it back together.  I'll wait here, on my couch.
« Last Edit: August 20, 2018, 10:20:52 AM by mizmo67 » Logged
Rancanfish
Member
*
Offline Offline

Posts: 1724


« Reply #27 on: September 17, 2015, 11:31:36 AM »

OK since I now can post pics, I decided to add them for you David!


* _MG_6954.JPG (1101.46 KB, 1936x1288 - viewed 309 times.)

* _MG_6955.JPG (987.59 KB, 1936x1288 - viewed 307 times.)

* _MG_6956.JPG (958.51 KB, 1936x1288 - viewed 304 times.)

* _MG_6957.JPG (1090.6 KB, 1936x1288 - viewed 303 times.)
Logged

Can't sleep, clowns will eat me.
Rancanfish
Member
*
Offline Offline

Posts: 1724


« Reply #28 on: September 17, 2015, 11:33:22 AM »

And a final pic, since AT.com told me I couldn't add any more pics in the previous post.


* _MG_6958.JPG (1169.85 KB, 1936x1288 - viewed 305 times.)
Logged

Can't sleep, clowns will eat me.
thorhammer
Member
*
Online Online

Posts: 4038


"You can't drank all day if you don't start..."


« Reply #29 on: September 17, 2015, 11:55:40 AM »

very nice!!!!!!!!!!!!!!
Logged
Pages: 1 [2] 3 4 5   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.222 seconds with 16 queries.