Shimano Tyrnos 10

Started by Bill Benrath, October 01, 2010, 02:04:43 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bill Benrath

Just bought a used 10 and had to open it up a see what's inside.  Reel only had one season on it but it was rode, sort of hard, and put away wet (kind of). Only had about 10 seconds of freespool but the drag seemed strong.

Got the reel down to the spool but can't get the cooling shield off.  Does it snap off, I tried to push my fingernail between the spool and the shield and can't get it to budge?  Tried unscrewing it with no luck; any suggestions?  Haven't had a Shimano apart with a cooling shield before.  Looking at some of the other posts on TLD's but couldn't see anything relevent.

Thanks in advance for any replies.

Bill

george.s


Bill Benrath

Yeah, I took those screws out first but it's not budging.  Looks like there is an o ring inside, maybe I'll try prying with a pick next.

Bill Benrath

It finally came off with a little more force and a screwdriver. 


Bryan Young

Glad you got it off.  Interesting because the Tyrnos 20 has a screw on cooling shield.
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D