alan tani @ alantani.com fishing reel repair rebuild tutorial Heavy vibration and grinding when reeling
Reel Repair by Alan Tani
July 08, 2020, 02:06:08 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Heavy vibration and grinding when reeling  (Read 10129 times)
0 Members and 1 Guest are viewing this topic.
Tom McKinney
Member
*
Offline Offline

Posts: 107


« Reply #15 on: May 21, 2015, 11:00:08 PM »

Update:

While I haven't fished it yet, the matched set from Cone has made a big difference.  I had no idea that mixing used gears and pinions could could be a problem.  Always learning in this site.

Thanks Cone.  And to all who gave advice.
Logged
foakes
Moderator
Member
****
Offline Offline

Posts: 6815


Sierra National Forest


« Reply #16 on: May 22, 2015, 07:11:17 AM »

When I have assembled reels from old parts -- many times the gears just will not quiet, or mesh properly -- until I switch them out with others.  But visually, I can see no problems.

Just like wearing someone else's pair of old shoes -- never feels or fits right.  Your feet and style of walking are different from anyone else.

That is why you will observe in many of the older quality reels -- the engineers generally used a steel pinion, along with a brass main.  They were allowing the dissimilar metals to be quieter and smoother when meshing -- by knowing the main would wear out sooner and slightly under typical usage.  And of course, it would perform more smoothly and quietly.

And sometimes a yoke is either tweaked enough or rough around the edges -- that a switch-out there will help also -- then when you get it where you are satisfied -- don't over slop grease on the drive train -- but a little extra would not hurt anything -- particularly when using old used parts.

Under actual fishing pressure -- everything needs to be looked at in the drive train -- bearings, gears, yoke, jack, pinion bearing axle, spool ends -- and even potential frame/stand/post twist causing alignment issues when meshing together.

Sounds like you made good progress with everyone's input.

Best,

Fred
« Last Edit: May 22, 2015, 07:17:47 AM by foakes » Logged

Self-worth is how you value yourself. It’s not based on what others think of you or the things you have (or haven’t) accomplished—it comes from within. But it’s easy to forget that our worth isn’t determined by outside forces -- each of us sets our own price.

In life, be flexible, willing to listen to others, willing to change your mind based on your good judgement -- that is how progress is made, and new horizons are discovered.  When the winds of change blow -- A flexible limb moves and thrives -- a stiff and stubborn limb just snaps.
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.164 seconds with 18 queries.