alan tani @ alantani.com fishing reel repair rebuild tutorial hello and a problem????
Reel Repair by Alan Tani
April 10, 2020, 09:40:41 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: hello and a problem????  (Read 3251 times)
0 Members and 1 Guest are viewing this topic.
bob
Member
*
Offline Offline

Posts: 7


« on: January 10, 2009, 06:16:00 AM »

penn 330 lever drags,the reel handles spin in reverse when drag is pulled?

you can hold the handle and drag will release line as soon as you let go of the handle,it will start spinning in reverse?


got the reels apart but not sure i see anything wrong internally...


thanks alan for any help..
Logged
alantani
admin
Administrator
Member
*****
Online Online

Posts: 18284



« Reply #1 on: January 10, 2009, 09:35:29 PM »

look at the right side plate.  find the four bridge screws in the middle of the right side plate.  there is one that is on the lower left.  it's the screw that holds the dog in place.  loosen it by a quarter turn.  if that does not work, try another quarter turn.  if it still does not work.  remove the side plate and find the anti-reverse dog and add a few drops of oil. it should start to click.  check out the gti post for a full breakdown.  please let me know how you do.  thanks!  alan
Logged

send me an email at alantani@yahoo.com for questions!
bob
Member
*
Offline Offline

Posts: 7


« Reply #2 on: January 11, 2009, 07:01:28 AM »

i took everything apart and the brass gear on the handle shaft spins..part # 98 330ld,not sure it is suppose to do this?the dogs lock it down but its like it is stripped out...
Logged
alantani
admin
Administrator
Member
*****
Online Online

Posts: 18284



« Reply #3 on: January 11, 2009, 06:49:25 PM »

bob, the drive shaft (gear sleeve) is part #98-320.  is the top rounded off?  is that why the handle is turning backwards?  can you e-mail a picture to me?  alan
Logged

send me an email at alantani@yahoo.com for questions!
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.211 seconds with 19 queries.