alan tani @ alantani.com fishing reel repair rebuild tutorial PG255/PG251 Yokes - $4.50 plus shipping
Reel Repair by Alan Tani
January 17, 2020, 02:37:53 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: PG255/PG251 Yokes - $4.50 plus shipping  (Read 7946 times)
0 Members and 1 Guest are viewing this topic.
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10312


The Reel Whisperer


« on: February 10, 2015, 10:06:24 PM »

Well, you guys know that I really love these small PG255s and PG251s.  I have never needed any parts...until I was asked to put a few together...then I discovered that the Yokes are different than the Jigmaster although every other part fits except the yoke.  The yokes are very similar to Penn's 12-155 but the 12-155 is slightly smaller.  So, in order to put these reels together, I needed PG255 or PG251 yokes.

Well, after extensive searching, there were none to be found, so I decided to get some cut...I was looking at 10, but the cost for 10 was the same as 50 due to the cost of setting up the machines.  I continually hit the reality that labor is majority of costs when getting custom parts made.  So here it is:



I have 40 stainless steel yokes for sale at $4.50 each plus shipping by USPS.

PM me if you are interested.

Thank you.
Bryan
« Last Edit: February 10, 2015, 10:11:04 PM by Bryan Young » Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Tunacious
Member
*
Offline Offline

Posts: 202



« Reply #1 on: February 11, 2015, 07:13:04 AM »

Good to know Bryan...thanks. I may take you up on a couple for my 255's. Any other PG parts you have, particularly screws?
Logged
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10312


The Reel Whisperer


« Reply #2 on: February 11, 2015, 07:46:34 AM »

I do have some parts.  Let me know what you need and I'll see what I have.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Tunacious
Member
*
Offline Offline

Posts: 202



« Reply #3 on: February 12, 2015, 01:52:40 PM »

pm sent
Logged
fIsHsTiiCkS
Member
*
Offline Offline

Posts: 882



« Reply #4 on: February 12, 2015, 04:55:38 PM »

I'll take I one!
Logged
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10312


The Reel Whisperer


« Reply #5 on: February 13, 2015, 06:45:28 AM »

I'll take I one!
Coming your way.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10312


The Reel Whisperer


« Reply #6 on: January 05, 2017, 07:03:51 AM »

Found a slight problem with my yokes on a couple of reels and none on others.  Sometime the yoke contacts the main gear at the corners of the yoke as shown in the photo in red.  I will be grinding down all of the yokes at these locations and will fix the design.  If I had sent you a yoke, please send me a PM with your name and address and I'll send you new yokes irrespective of whether the yokes contact the main gear or not.  This will insure that it will never hit the main gear.

Sorry for any trouble.

Bryan


* 386_10_02_15_10_48_59-2.jpg (19.05 KB, 550x153 - viewed 308 times.)
« Last Edit: January 05, 2017, 07:29:45 AM by Bryan Young » Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
PacRat
Firearms Group
Member
**
Online Online

Posts: 487



« Reply #7 on: January 05, 2017, 07:57:18 AM »

Thank you for the heads-up. The customer service in this group is second to none. You guys are the best.
-Mike
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.338 seconds with 17 queries.