alan tani @ alantani.com fishing reel repair rebuild tutorial Charter Special - bearing touching main gear.
Reel Repair by Alan Tani
February 27, 2020, 09:00:15 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Charter Special - bearing touching main gear.  (Read 1372 times)
0 Members and 1 Guest are viewing this topic.
michaelc
Member
*
Offline Offline

Posts: 26


« on: January 08, 2011, 08:49:29 PM »

Hi Alan and everyone.

 I have a problem with the right side main bearing riding up from its seat in the side-plate and grinding against the edge of the main gear.  The bearing is just not staying put with the light grease I have been using. The bearing is only a couple of microns too loose in the graphite side-plate and will fall out with a light tap, which is the problem.  Heavy grease may work, any other ideas?
Logged
alantani
admin
Administrator
Member
*****
Online Online

Posts: 18098



« Reply #1 on: January 08, 2011, 09:24:19 PM »

the pinion gear should hold it firmly in place.  there should be no shims or washers under the main gear to worry about.  is this a problem only with the side plate off, because the fully assembled reel should be fine.  alan
Logged

send me an email at alantani@yahoo.com for questions!
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.453 seconds with 17 queries.