alan tani @ alantani.com fishing reel repair rebuild tutorial How to tell if alum. Spool works with 9/0
Reel Repair by Alan Tani
December 06, 2019, 01:04:34 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: How to tell if alum. Spool works with 9/0  (Read 3408 times)
0 Members and 1 Guest are viewing this topic.
Sharkin904
Member
*
Offline Offline

Posts: 131



« on: February 21, 2016, 12:40:04 PM »

I need a spool, but I know the age of the reel can prevent the 9/0 from using the newer aluminum spool..how do I know if it will work?
Logged
foakes
Moderator
Member
****
Offline Offline

Posts: 6217


Sierra National Forest


« Reply #1 on: February 21, 2016, 12:43:20 PM »

Many on here will know --

Daron, Lee, Ted, Chad, Alan, Bryan, Bill, and probably another dozen other knowledgeable experts.

They will be along shortly.

Best,

Fred
Logged

Patience...and the rewards that come with it -- need to be experienced...otherwise, it isn't patience!


What's the difference between a worthwhile plan and a vision?

Your good, worthwhile  plan will always keep changing...However, a good vision will always remain constant and unchanging...
Sharkin904
Member
*
Offline Offline

Posts: 131



« Reply #2 on: February 21, 2016, 01:12:47 PM »

Hahah that's what I was hoping for! Thanks Fred. Just ordered the progear for it, last think I needed
Logged
akfish
Moderator
Member
****
Online Online

Posts: 1084



« Reply #3 on: February 21, 2016, 01:39:19 PM »

If your 9/0 has ball bearings, not bushings, the aluminum spool should work.
Logged

Taku Reel Repair
Juneau, Alaska
907.789.2448
handi2
Sensei
Member
***
Online Online

Posts: 3424


OCD Reel Service and Repair


« Reply #4 on: February 21, 2016, 03:36:34 PM »

If your 9/0 has ball bearings, not bushings, the aluminum spool should work.

That's the only difference. If your 9/0 is really old it will have bushings on each side instead of bearings. That will limit you to using the heavy bronze spool only.
Logged

OCD Reel Service & Repair
Gulf Breeze, FL
cbar45
Member
*
Offline Offline

Posts: 474


« Reply #5 on: February 21, 2016, 03:40:18 PM »

^^What akfish and handi2 both stated^^

9/0's are a relatively straightforward swap as the aluminum spool used (29L-115) has remained unchanged, even on the L2 models.

As long as you have a ball-bearing model an aluminum spool should work.

Here are a few photos showing the difference between the older bushing 9/0's, and the newer ball-bearing models:

https://www.mysticparts.com/PennParts/Technical/115LDesignChangeRight.aspx


https://www.mysticparts.com/PennParts/Technical/115LDesignChangeLeft.aspx

Chad

"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"

« Last Edit: August 03, 2018, 10:09:07 AM by mizmo67 » Logged
Sharkin904
Member
*
Offline Offline

Posts: 131



« Reply #6 on: February 21, 2016, 03:48:36 PM »

Perfect. Anyone have one they'd part with?? lol, finally finishing up my 9/0. Minus one of Toms frames, because I drug my feet too long  Cry
Logged
Shark Hunter
Moderator
Member
****
Offline Offline

Posts: 11189


The Rogue of the Seven Seas!


« Reply #7 on: February 21, 2016, 06:30:35 PM »

The spool shaft is a lot shorter on the bushing model. They can be found with one piece or three piece spools. I have a new member sending me a 9/0 that was his grandfathers.
It is three piece bushing model. I am in search of a bushing one piece spool if anybody has one for this build.
Logged

Life is Good!
Alto Mare
Moderator
Member
****
Online Online

Posts: 12576


Southeastern Pennsylvania


« Reply #8 on: February 21, 2016, 07:01:58 PM »

Yes, I remember seeing a one piece spool on the plates with bushings, but I thought the shaft was the same as later models.
Daron, if you have that spool in hand, give me the dimensions and I'll check and see what I have.
I know I do not have the three piece spool, but should have a couple of brass spools somewhere.
Logged

Forget about all the reasons why something may not work. You only need to find one good reason why it will.
Shark Hunter
Moderator
Member
****
Offline Offline

Posts: 11189


The Rogue of the Seven Seas!


« Reply #9 on: February 21, 2016, 07:21:24 PM »

I only have one bushing 9/0 and it has the one piece spool. Randy said he has one, but it is full of line and he is not sure.
I will find it and send you the dimensions.
I can use the one I have, but then the reel will be useless.
Logged

Life is Good!
Alto Mare
Moderator
Member
****
Online Online

Posts: 12576


Southeastern Pennsylvania


« Reply #10 on: February 21, 2016, 07:27:20 PM »

I just found mine, I have two new in box aluminum and brass, but the shaft is the same length. I would grab Randy's, as long as it doesn't have a wobble. Those are going to be hard to find, unless you buy a complete reel on line. Undecided
Logged

Forget about all the reasons why something may not work. You only need to find one good reason why it will.
Shark Hunter
Moderator
Member
****
Offline Offline

Posts: 11189


The Rogue of the Seven Seas!


« Reply #11 on: February 23, 2016, 11:03:00 PM »

Found one! From the One and only Mike C. Wink
Logged

Life is Good!
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.219 seconds with 17 queries.