Curado 70XG and wet bearings

[Jayce]

Thanx bro.

Checked it again and problem still persists.

Any advice ?

[johndtuttle]

Thanx bro.

Checked it again and problem still persists.

Any advice ?

Is this a new reel or an old one that developed this trouble?

[Strewth]

Can be caused by lateral play in the spool because the cast control knob is not screwed down tight enough. Do you have any lateral play in the spool?

[Jayce]

new reel

It was more obvious before I opened the reel.
When I reassembled it it somewhat corrected it a little but still uneven.

check spool no lateral play.

Will be doing a final check tonight

[oc1]

The other thing is that the way the line stacks can be somewhat influenced by the rod.  If I am constantly casting to my left side the line will stack a little bit more to the left because the rod is bent that direction on the retrieve and the line is usually on the left side of the rod guides and the levelwind guide.  The line lay will never be perfect.  If it is not bad enough to cause a problem then just ignore it.  It does not affect performance.  A picture would help.
-steve