alan tani @ alantani.com fishing reel repair rebuild tutorial makaira 8 II rebuild - 3/4/2011
Reel Repair by Alan Tani
November 26, 2020, 03:44:18 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 2 3 [4]   Go Down
  Print  
Author Topic: makaira 8 II rebuild - 3/4/2011  (Read 50933 times)
0 Members and 1 Guest are viewing this topic.
Norcal Pescador
Redding, CA
Member
*
Offline Offline

Posts: 1517



« Reply #45 on: July 27, 2014, 06:48:52 PM »

they are the same.

 Smiley Smiley
thanks!
Logged

Rob

Measure once, cut twice. Or is it the other way around? Roll Eyes

"A good man knows his limits." - Inspector Harry Callahan, SFPD
Eric_LBZ
Member
*
Offline Offline

Posts: 13


« Reply #46 on: February 24, 2015, 12:31:26 PM »

Would this reel be a good 50# rig for yoyo jigging and live bait fishing on A 7' stick?
Logged
alantani
admin
Administrator
Member
*****
Online Online

Posts: 18903



« Reply #47 on: February 24, 2015, 04:04:24 PM »

maybe a makaira 10, unless you don't need the line capacity. 
Logged

send me an email at alantani@yahoo.com for questions!
Eric_LBZ
Member
*
Offline Offline

Posts: 13


« Reply #48 on: February 25, 2015, 10:59:45 PM »

Thanks Alan.. I just another possibility which is the new Andros A 12S about $90 less than the Mak.  No shipments yet but should be here by Fred Hall show.
Logged
petermex
Member
*
Offline Offline

Posts: 6


« Reply #49 on: July 09, 2015, 10:23:09 AM »

Hello: My comunication hability is limited because of my poor english domine, sorry about that. My question is if there is a METALIC ratchet click gear for my Makaira 10 II as a substitute for Key # 401. It has failed twice under long and heavy runs, and once more broke under screwdriver pressure ( ¿ my fault ? ). I will appreciate any input. ¿ Does somebody had this issues ?. Thanks.
                       
                                                                            Peter...
Logged
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
*****
Online Online

Posts: 10652


The Reel Whisperer


« Reply #50 on: July 09, 2015, 11:52:42 AM »

I haven't seen one with a metal clicker.  Sorry.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Trixkelly
Member
*
Offline Offline

Posts: 4


« Reply #51 on: November 17, 2020, 05:26:32 PM »

Thank you for posting this thread! I finally got my hands on a mak10 sea and this tutorial was just what I needed to get the job done.
I sat back in the living room today and did the lube and clean version of this service. After lubing the spool bearings (TS321) and some fresh blue lube (Yamaha waterproof) the reel easily free spools for a minute forty one seconds And meshed gears are butter smooth.
 I found the tear down to be easy and just keep an eye on the gear shaft seating properly down onto spool.
All components are high quality for sure.
Thanks to all who make this site possible. Cheers to Alan!
« Last Edit: November 20, 2020, 10:44:33 PM by Trixkelly » Logged
Pages: 1 2 3 [4]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.181 seconds with 17 queries.