13-18 OD

Started by Keta, July 05, 2016, 04:13:05 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Keta

What is the OD of a 13-18 spacer washer?  My drawing got corrupted.
Hi, my name is Lee and I have a fishing gear problem.

I have all of the answers, yup, no, maybe.

A man who carries a cat by the tail learns something he can learn in no other way.
Mark Twain

bluefish69

Keta

Do you mean 3-18 spacers? There are 2 thicknesses of these. If you want I could send you some that you cut for me. The Dia. fits through the hole in the side plate.

Mike
I have not failed.  I just found 10,000 ways that won't work.

Bryan Young

I'll get back to you Lee.  I'll measure them up tonight.

If Lee does not have them in stock, I have them as well as 13-16 washers.  both are 0.020" thick if I recall.
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

Keta

#3
Yes, the spacer washer.  I have a order to cut, I need the OD.
Hi, my name is Lee and I have a fishing gear problem.

I have all of the answers, yup, no, maybe.

A man who carries a cat by the tail learns something he can learn in no other way.
Mark Twain

bluefish69

Lee

15.92 mm OD X 0.45 mm Thick      this is the thin spacer

0.90 mm for the thick spacer

I have not failed.  I just found 10,000 ways that won't work.

thinkwahoo

And for us SAE junkies, .622 OD. They made them .020, and they made them .045 (with a bend in the thick ones)

bluefish69

TW

Give me a break I don't know which measurements a machinist uses. I'm a retired Plumber. TW remember S.S.D.D.

Mike
I have not failed.  I just found 10,000 ways that won't work.

Bryan Young

Quote from: bluefish69 on July 05, 2016, 11:00:07 PM
Lee

15.92 mm OD X 0.45 mm Thick      this is the thin spacer

0.90 mm for the thick spacer


Thanks Mike. I just got home and don't need to measure it now.
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

Keta

I can think metric, thanks Mike. 

I will be cutting some in .020 (.508mm), and .035/.037 (.889mm/.940mm)   Would there be a need for .045" (1.143mm)
Hi, my name is Lee and I have a fishing gear problem.

I have all of the answers, yup, no, maybe.

A man who carries a cat by the tail learns something he can learn in no other way.
Mark Twain

bluefish69

Lee

Instead of putting in 2 thin spacers I use 1 thicker spacer. Then you can add a thin one if you like.

Mike
I have not failed.  I just found 10,000 ways that won't work.