alan tani @ alantani.com fishing reel repair rebuild tutorial Sleeveing Spool on a Talica 10II
Reel Repair by Alan Tani
October 21, 2021, 02:47:13 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Sleeveing Spool on a Talica 10II  (Read 2486 times)
0 Members and 1 Guest are viewing this topic.
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
*****
Online Online

Posts: 10838


The Reel Whisperer


« on: November 13, 2016, 04:28:45 AM »

In today's lever drag reels, it's not very common for me to sleeve spools anymore as the shaft is normally cut with an integral spacer that acts like a spool sleeve. When working on a Talica 10II today, I noticed this type of shaft. Awesome!  NOT!!!   They cut the spacer way short. I had to add 14 shims to take up the space.  Now the spool has 0.05 play in the spool allowing optimum free spool at higher drag settings while supporting the inner race of the spool to keep it in alignment and to reduce the thrust load on the bearing.

I used 13 5x7x0.3 mm and 1 5x7x0.25 mm.


* IMG_8780.JPG (2109.89 KB, 4032x3024 - viewed 186 times.)

* IMG_8782.JPG (2459.65 KB, 4032x3024 - viewed 193 times.)

* IMG_8781.JPG (2231.83 KB, 4032x3024 - viewed 194 times.)
« Last Edit: November 13, 2016, 07:48:36 AM by Bryan Young » Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Ron Jones
Firearms Group
Member
**
Online Online

Posts: 4447


« Reply #1 on: November 13, 2016, 07:08:47 AM »

One MORE reason to stick with star drags.
Ron
Logged

Ronald Jones
To those who have gone to sea and returned and to those who have gone to sea and will never return
"
Tightlines667
Sensei
Member
***
Offline Offline

Posts: 4541



« Reply #2 on: November 13, 2016, 07:09:21 AM »

Thats alot o shims.  

I have run accross similar situations, though I can't recall which models off of the top of my head.  I admut to not taking the time to shim properly for maximum freespool, despite the knowledge that you and Alan have imparted.

I applaud your efforts.
« Last Edit: November 13, 2016, 07:10:02 AM by Tightlines666 » Logged

Hope springs eternal
for the consumate fishermen.
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
*****
Online Online

Posts: 10838


The Reel Whisperer


« Reply #3 on: November 13, 2016, 07:50:38 AM »

If I had thicker shims or if a good machine I would have sleeves it with a shot piece of brass tubing.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
steelfish
Sensei
Member
***
Online Online

Posts: 4150


Sea of Cortez


« Reply #4 on: May 25, 2019, 08:58:21 PM »

 Now the spool has 0.05 play in the spool allowing optimum free spool at higher drag settings

bryan can you tell more about how shimming the shaft helps to increase free spool at high drag?

is this noticiable only when casting or even when bait fishing ?

monstly the background of why the need to add shims
Logged

The Baja Guy
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
*****
Online Online

Posts: 10838


The Reel Whisperer


« Reply #5 on: May 26, 2019, 03:53:33 PM »

The spring that pushes on the inner race of the spool bearing mis aligns because the outer race is being held  by the spool. If the inner and outer races are in complete alignment then there would be no pressure on the spool bearing giving maximum spin at higher drag ranges.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
steelfish
Sensei
Member
***
Online Online

Posts: 4150


Sea of Cortez


« Reply #6 on: May 26, 2019, 11:19:30 PM »

The spring that pushes on the inner race of the spool bearing mis aligns because the outer race is being held  by the spool. If the inner and outer races are in complete alignment then there would be no pressure on the spool bearing giving maximum spin at higher drag ranges.

totally makes sense, thanks amigo

Logged

The Baja Guy
steelfish
Sensei
Member
***
Online Online

Posts: 4150


Sea of Cortez


« Reply #7 on: October 14, 2021, 12:54:24 AM »

coming back to you Bryan.

how do you know whats the correct size of the sleeve tube or in this case, how did you find out you needed 14 shims and not 12 or 15?
Logged

The Baja Guy
creech
Member
*
Offline Offline

Posts: 19


« Reply #8 on: October 14, 2021, 07:49:59 PM »

shame on you shimano! especially the higher end lever drag model.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.058 seconds with 21 queries.