Penn 113HN/US113 Senator Bridge Assembly

Started by Cortez_Conversions, November 13, 2016, 06:21:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Cortez_Conversions


The upgraded Penn 113HN/US113 Senator Bridge Assemblies are here!
This is Bridge assembly specifically designed for those who want to run drag numbers at or above the recommended maximum settings on your
Baja Special or 113 US Senator family of reels.

Read the discussion here: http://alantani.com/index.php?topic=17972.0

Here it is:



The bridge comes fully assembled ,drop in ready, with the following components:
Modified Penn Bridge 3-113HN
One piece construction, hardened 416 stainless steel gear sleeve.
Hardened 17-4 stainless steel dogs.
Modified Penn dog springs 14-15KG
Stainless steel dog posts.
Stainless steel washers, screws, and cir-clips.
Delrin washer to replace Penn 4-155 under gear washer.(not pictured)

Because of the assembly time, shipping on these will have a two week lead time.
Price, including shipping is $65.00 each.

Rob will have them on the website in the next few days.

I want to thank everyone for their input, especially Jeff and Alex for the hands on testing!
Tom
Visit: cortezconversions.com
Forget about all the reasons why something may not work. You only need to find one good reason why it will.-Sal

Shark Hunter

You knocked that one out of the Park Tom!
Excellent work my Man! ;)
Life is Good!

RowdyW

Great work Tom. I'm now waiting to hear from Penn (Tony?) on their thoughts.      Rudy

Bryan Young

That just makes me want to go out and buy a 113HN.
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

thorhammer


speedwagon2

Tom,
  So this bridge assembly will work in a 133H?
  Dave Babcock 

Brendan


swill88


RowdyW

Quote from: speedwagon2 on November 13, 2016, 11:36:51 PM
Tom,
  So this bridge assembly will work in a 133H?
  Dave Babcock 
Baja & U S Senator.  It will not fit a 113 4/0 Senator or 113H Special Senator.

steelfish

Quote from: thorhammer on November 13, 2016, 10:04:11 PM
Hey Alex, batter up!!!!

You betcha John

Gonna wait until available in two weeks and will get one for my 2nd Baja Special, my panga guide will get another in december and I will recommed it to any of the local hardcore guys with Baja Special


@Tom, your welcome amigo, it was a pleasure to help on the testing id this terrific upgrade part
The Baja Guy

Cortez_Conversions

Dave, as mentioned, this only fits the 113HN Baja Special and the three new(ish) 113 U.S. Senator reels.

Rob let me know that he got them on the website, so go get them if you want them!
I assembled 10 this morning, so the two week lead time will be for the next batch.
Tom
Visit: cortezconversions.com
Forget about all the reasons why something may not work. You only need to find one good reason why it will.-Sal

coastal_dan

Are these super limited or do you think they'll be available after Christmas?  All 'fun' money goes to family gifts for the next few weeks...but after that I'd be interested in one for my US 113N.  Thanks Tom!
Dan from Philadelphia...

Where Land Ends Life Begins...

Cortez_Conversions

I made enough parts for about a hundred units. I'll be assembling them ten at a time, so you should be good Dan.
You may want to tell Santa you've been good too!
Visit: cortezconversions.com
Forget about all the reasons why something may not work. You only need to find one good reason why it will.-Sal

swill88



Santa says I'm good... Bought me one last night!

jurelometer

Quote from: Cortez_Conversions on November 13, 2016, 06:21:33 PM

The upgraded Penn 113HN/US113 Senator Bridge Assemblies are here!
This is Bridge assembly specifically designed for those who want to run drag numbers at or above the recommended maximum settings on your
Baja Special or 113 US Senator family of reels.

Read the discussion here: http://alantani.com/index.php?topic=17972.0

[snip]

The bridge comes fully assembled ,drop in ready, with the following components:
Modified Penn Bridge 3-113HN
One piece construction, hardened 416 stainless steel gear sleeve.
Hardened 17-4 stainless steel dogs.
Modified Penn dog springs 14-15KG
Stainless steel dog posts.
Stainless steel washers, screws, and cir-clips.
Delrin washer to replace Penn 4-155 under gear washer.(not pictured)

Because of the assembly time, shipping on these will have a two week lead time.
Price, including shipping is $65.00 each.

Rob will have them on the website in the next few days.

I want to thank everyone for their input, especially Jeff and Alex for the hands on testing!
Tom

Wow!  Even chamfered the dogs.  My only complaint is that the pricing is wayyy too low. We all owe Tom a big thanks for making such a high quality upgrade available and so affordable.

-J