Handle Arm Orders Closed

[Cortez_Conversions]

Hello Lee,

I'd like three of each type, all single hole version.

Thanks!
Tom

[swill88]

Lee, I would like:
(1) B, 2 hole
(1) B, 1 hole
(1) C, 1 hole

All 3 with the 5/16" handle hole for Alan's 5/0 handle.

Thanks.

[Jeffro]

I'd be down for 2 A's and 2 B's, two hole version please.

[JRD]

Two type A and one type B - single hole version with 3/16 knob hole

[TongassFisher]

Lee,

Can I add one more handle to my order? Can I get the shorter type A for a total of 3 handles? Sorry to complicate things.


Trev

[Keta]

Can I add one more handle to my order? Can I get the shorter type A for a total of 3 handles?

No problem.

[day0ne]

4 Type B 2 hole handles please

[Alto Mare]

Lee, I'll take 3 type C , one or two holes, it doesn't matter...whatever you have left.

Sal

[Keta]

I have used up all of the material I currently have, future cuttings can be made if I get orders for 15 or more.

[broadway]

Lee, what is your standard sized hole for the grasp? I would also like the hole for Alan's 5/0 grasps with the countersink.
Thanks!
Dom

[Bryan Young]

Lee, what is your standard sized hole for the grasp? I would also like the hole for Alan's 5/0 grasps with the countersink.
Thanks!
Dom

Countersunk should be 5/16"

"Standard" will be 3/16" and 5/16" but can be drilled to anything between 1/8" to 5/16". 

[Shark Hunter]

Three of Type C with 5/16" handle hole.
This is the diameter of Alan's 5/0 Kokelar Handles with the countersink.
Thanks Lee.

One hole or 2?

One hole.
I'll take either. I know the quality of your work.
I like the throw of the two hole, but a single will work.
Dom,
the 5/0 Kokelar with the 5/16" countersink is where its at.
Where the Meat meets the Muscle.
Once you've tried one, Nothing else will do.
At least in my book.

[broadway]

Thanks Bryan and Daron!
D, anything you have turned me onto has been a success so say no more....
Lee, please make mine 5/16" with the countersink for the 5/0 and I don't care if ya a 1 or 2 holer.
Thanks guys,
Dom

[El Pescador]

Lee,

Put me down for ONE Type B - handle for my 349H reel!!!!  a 2-holer if possible.

Thank you.     Wayne

I see everyone is getting picky!

Well, so will I!    Lee, please make my handle with a 5/16" with a countersink for Alan's 5/0 handle. 

THANK YOU.

Wayne

[Decker]

I see everyone is getting picky!

Lee, I think you're going to need a secretary.