SHIMANO TLD 50 2 SPEED

Started by dougwm10, May 15, 2011, 04:54:35 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

dougwm10

Hi

I need to strip down - service - and re-build my Shimano TLD50 2 speed reel and any help or advice with the procedures to follow would be greatly appreciated.

Is there a download available showing the steps to be taken and recommendations based on prvious experience.


Hope someone can help

alantani

if you can familiarize youself with the tld 20/30II post and the tld 50 schematics, you will get through just fine.  they are very similar.  alan
send me an email at alantani@yahoo.com for questions!

ohfishalee

Quote from: alantani on May 15, 2011, 07:21:45 AM
if you can familiarize youself with the tld 20/30II post and the tld 50 schematics, you will get through just fine.  they are very similar.  alan

What is the stock belleville washer sequence for the TLD50A?

Tightlines667

#3
Quote from: ohfishalee on April 13, 2019, 06:49:53 PM
Quote from: alantani on May 15, 2011, 07:21:45 AM
if you can familiarize youself with the tld 20/30II post and the tld 50 schematics, you will get through just fine.  they are very similar.  alan

What is the stock belleville washer sequence for the TLD50A?

                                                                   ()(())|

BTW, I believe this is the same for the TLD 50A, TLD50WLRS, and Tiagra 50W

However, the Tiagra 50WLRS  is        (())(())|


I don't think the bellevilles changed between the 2 generations of each of these reels.


John
Hope springs eternal
for the consumate fishermen.