Titanium drag stars

Started by Three se7ens, August 14, 2017, 03:12:24 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Three se7ens

I have a few titanium drag stars available.  All are 2.5" diameter, 1/8" thick Sal's Stars, and can be had to fit fine thread Jigmasters, Newell 200-600's, and the 113H.  I have a total of 7 available, pricing as follows:

Fine thread Jigmaster - $23
Newell - $24
113H - $24

These were from a special run, and are not something I plan on keeping in stock.  So act fast if you want one.

Reply here to reserve yours, and I will PM you with payment info.


Rothmar2

I'll grab 1 fine thread Jigmaster for me thanks Adam.

mhc

I'll take one of the jigmaster fine thread as well thanks Adam.
Mike
It can't be too difficult - a lot of people do it.

PacRat

I'll take a 113H.
Thanks for the heads up!
Mike

PacRat

Better put me down for a fine thread jigmaster too
Thanks

Three se7ens

PM's sent.

Btw, these titanium stars weigh just 15 grams, while the stainless ones are 24 grams in this size. 

JRD

I will take a jiggly star also

Jeffro

113H would be great if available... Thx.

Three se7ens


vilters

Adam, let me know if a jigmaster or newell titanium star is available please. thanks, Steve

Three se7ens

#10
Quote from: vilters on August 16, 2017, 06:04:10 PM
Adam, let me know if a jigmaster or newell titanium star is available please. thanks, Steve

Both, or either. I don't cut the threads until after I receive an order.

Btw, the Newell and fine thread jigmaster stars are interchangeable.  The only difference is that I supply the Newell ones with a small spacer to keep the star from bottoming out on the side plate.  That spacer is also available separately.

pompano joe

I'll take two for a 113H, Sal.  Just emailed you this morning.  Thanks!
Pompano Joe


mitch27

#13
I'll take it for a 113H  and a titanium counter balance handle blank for a 113H  Thanks mitch27   PS(6mm hole)

mitch27

Thanks for making these, PayPal Info sent. mitch27