alan tani @ alantani.com fishing reel repair rebuild tutorial saltist 40
Reel Repair by Alan Tani
May 11, 2021, 09:37:16 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 2 [3]   Go Down
  Print  
Author Topic: saltist 40  (Read 53303 times)
0 Members and 1 Guest are viewing this topic.
Fish-aholic
Photo Group
Member
**
Offline Offline

Posts: 322


« Reply #30 on: February 12, 2015, 10:11:29 PM »

chxh8me, with the lever positioned in free spool, any cranking of the handle will cause the main gear to rotate with the drive shaft. The pinion gear is still in contact with the main gear so it too will rotate. Inevitably this generates friction upon the spools shaft that passes through the pinion gear thus causing the spool to (slightly) rotate. It is a non issue as you thought. Wink
Logged
chxh8me
Member
*
Offline Offline

Posts: 7


« Reply #31 on: February 12, 2015, 11:35:51 PM »

chxh8me, with the lever positioned in free spool, any cranking of the handle will cause the main gear to rotate with the drive shaft. The pinion gear is still in contact with the main gear so it too will rotate. Inevitably this generates friction upon the spools shaft that passes through the pinion gear thus causing the spool to (slightly) rotate. It is a non issue as you thought. Wink

Thank you.  That's what I was hoping.  glad I didn't mess anything up when I was working on it.
Logged
Osmo3
Member
*
Offline Offline

Posts: 2


« Reply #32 on: May 02, 2021, 12:12:32 AM »

I purchased a used one in good external condition thinking that an easy upgrade was in store.  Unfortunately, the previous owner glued the side plate screws with loctite blue! 🤬  With a lot of force, I was able to eventually loosen the screws however the slots were ruined so I ordered replacements from Mike's Reel Repair.  Oh well! At least Daiwa sent me the correct schematic.
Logged
Pages: 1 2 [3]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.059 seconds with 20 queries.