alan tani @ alantani.com fishing reel repair rebuild tutorial 112h bridge
Reel Repair by Alan Tani
August 07, 2020, 10:24:35 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: 112h bridge  (Read 3148 times)
0 Members and 1 Guest are viewing this topic.
jigmaster501
Member
*
Offline Offline

Posts: 263


« on: October 12, 2017, 12:31:19 PM »

Guys and gals,

I was looking at the handle sideplate for the 112h.

The 2 upper screws match the 2 upper screws for the jigmaster bridge.

The bottom screws do not.

I was wondering if the bottom holes of the jigmaster bridge were realigned, could we have a ready to go double bridge for the 112h.....

What do you guys think?Huh?

Logged
RowdyW
Firearms Group
Member
**
Online Online

Posts: 2740



« Reply #1 on: October 12, 2017, 02:18:02 PM »

Why? With a dremel tool, epoxy, drills, taps, time, etc "anything" can be made to fit. It would probably be easier, cheaper, & quicker to just dremel out the plate for a second dog. With all these "ideas" being thrown around it's time to just do it, take photos, and show us how to do it. Ideas are the easy part, anyone can do that. But to follow through with it takes time, ingenuity, & work.  Roll Eyes  Grin             Rudy
Logged
handi2
Sensei
Member
***
Offline Offline

Posts: 3494


OCD Reel Service and Repair


« Reply #2 on: October 12, 2017, 03:04:01 PM »

Its much better to double dog the 112H reel. 100% proven and dependable.
Logged

OCD Reel Service & Repair
Gulf Breeze, FL
Black Pearl
Webmaster
Member
****
Online Online

Posts: 1302


WWW
« Reply #3 on: October 12, 2017, 03:05:31 PM »

I am working it. I will need a 112h bridge.
Logged
jigmaster501
Member
*
Offline Offline

Posts: 263


« Reply #4 on: October 13, 2017, 02:23:57 AM »

I have one that I double dogged with carving of the plate and all.... It is a dream....

A bridge ready to go would be nice.

Alan, looking at the jigmaster bridge, with new holes, we might just need to carve a bit out of the sideplate.

Don't know for sure.

Send me an address and I will send you one of mine..

Eugene
Logged
Black Pearl
Webmaster
Member
****
Online Online

Posts: 1302


WWW
« Reply #5 on: October 13, 2017, 05:02:15 AM »

I have one that I double dogged with carving of the plate and all.... It is a dream....

A bridge ready to go would be nice.

Alan, looking at the jigmaster bridge, with new holes, we might just need to carve a bit out of the sideplate.

Don't know for sure.

Send me an address and I will send you one of mine..

Eugene

Hi Eugene,

You can send it to the following address:

PRO Challenger LLC
1128 Royal Palm Beach Blvd,
#398
Royal Palm Beach, FL. 33411

Thanks,
--Alan
Logged
JRD
Member
*
Online Online

Posts: 431


« Reply #6 on: October 15, 2017, 07:38:56 AM »

Alan if you get these going I'm in for two.
Logged
jigmaster501
Member
*
Offline Offline

Posts: 263


« Reply #7 on: October 15, 2017, 08:57:50 AM »

Alan,

Sending you a bridge in a complete sideplate via FedEx today.

Just in case you see the need to just carve out a new sideplate out of delrin or something to fit the bridge already made.

You have options...lol

Eugene

Logged
jigmaster501
Member
*
Offline Offline

Posts: 263


« Reply #8 on: October 15, 2017, 11:37:38 AM »

You should have It by thursday....

Let me know when you get it

Eugene
Logged
Alto Mare
Moderator
Member
****
Online Online

Posts: 13173


Southeastern Pennsylvania


« Reply #9 on: October 15, 2017, 01:21:45 PM »

This bridge was discussed a few years back
http://alantani.com/index.php?topic=5473.msg181556#msg181556

Sal
Logged

Forget about all the reasons why something may not work. You only need to find one good reason why it will.
jigmaster501
Member
*
Offline Offline

Posts: 263


« Reply #10 on: October 15, 2017, 05:41:24 PM »

Sal,

If we can use the same bridge but put the screw holes in different places, we might have something here. Or maybe just make delrin plates to match the bridges...

Hopefully we can do something good here.

Eugene
Logged
Alto Mare
Moderator
Member
****
Online Online

Posts: 13173


Southeastern Pennsylvania


« Reply #11 on: October 15, 2017, 06:01:00 PM »

Mine are working just fine with my own second dog, but it is a pain to service, the best option would be a custom bridge from Alan.
Alan probably forgot, I talked about this reel with him 3 years ago.
Alan's response was that the 3/0's weren't as popular as the Jigmasters and he thought it wasn't worth it to him.
Maybe he changed his mind...we'll see.
I've heard in the past that the Jigmaster was the top seller for penn reels.

Best,

Sal
Logged

Forget about all the reasons why something may not work. You only need to find one good reason why it will.
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
*****
Online Online

Posts: 10512


The Reel Whisperer


« Reply #12 on: October 16, 2017, 08:19:22 PM »

Are the bridges the same size, same post position, except different bridge screw location?  Could one bridge with 2 different screw locations work?  Just a thought to maybe have one sku for 2 reels.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
RowdyW
Firearms Group
Member
**
Online Online

Posts: 2740



« Reply #13 on: October 20, 2017, 02:31:34 PM »

Bryan, I beleive the screw holes overlap so two different bridges will be needed.     Rudy
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.193 seconds with 17 queries.