Insert drag kit for Jigmaster

Started by Three se7ens, November 11, 2017, 04:10:43 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Alto Mare

#15
Quote from: Decker on December 05, 2017, 05:07:41 AM
Adam, thanks for the info; makes sense to me now.  Glancing at those older threads, I see that Sal was closely involved in the development.   Thank you both for your efforts!  

I hope to be an active enough fisherman one day to put those kits to work hard.  ;)
Joe, Adam pretty much explained it all, I just want to add that using these washers, you could set the drags to your liking:
http://alantani.com/index.php?topic=6517.msg56201#msg56201
These were made possible by Penn.
As for the inserts, this guy lit the match under our feet, most of everything else we do here, evolved from this man:
http://alantani.com/index.php?topic=6517.msg55649#msg55649

"DOC "

Guys like Adam, Alan C. and Lee have been doing a great job from here.
I have many parts from all three of these gentlemen.
And lets not forget Bri-Bri, his is not really related to the versa drag system, but he did come up with an excellent drag upgrade as well.
We have many choices here, all work very well.

Best.

Sal
Forget about all the reasons why something may not work. You only need to find one good reason why it will.

Swami805

Just a newell guy question. Aren't 500 gears the same dimensions as standard newell gears?
Would these work in a newell too? I've been using Bryan's upgrade kits and the work better than great. Just another option. I know when I order CF washers from smooth drags they're the same so it seems like it should work.( I use 3 in 220's since over 8lbs is over kill). I'll buy a set if there's one available and give it a shot.
Sheridan
Do what you can with that you have where you are

Decker

Quote from: Alto Mare on December 06, 2017, 01:30:43 AM

Joe, Adam pretty much explained it all, I just want to add that using these washers, you could set the drags to your liking:
http://alantani.com/index.php?topic=6517.msg56201#msg56201
These were made possible by Penn.
As for the inserts, this guy lit the match under our feet, most of everything else we do here, evolved from this man:
http://alantani.com/index.php?topic=6517.msg55649#msg55649

"DOC "

Guys like Adam, Alan C. and Lee have been doing a great job from here.
I have many parts from all three of these gentlemen.
And lets not forget Bri-Bri, his is not really related to the versa drag system, but he did come up with an excellent drag upgrade as well.
We have many choices here, all work very well.

Best.

Sal

Hats off to all of you!

Robert Janssen

QuoteAs for the inserts, this guy lit the match under our feet, most of everything else we do here, evolved from this man:
http://alantani.com/index.php?topic=6517.msg55649#msg55649

"DOC "

Thanks for remembering and giving cred. I appreciate it.
Doc.

.

mrwilson99

Would this kit fit any of the 4/0 based pro gears and when can we purchase :)
David

day0ne

Quote from: mrwilson99 on January 07, 2018, 04:59:32 AM
Would this kit fit any of the 4/0 based pro gears and when can we purchase :)

No, but his 113H insert kit will
David


"Lately it occurs to me: What a long, strange trip it's been." - R. Hunter

rjones

Is this jigmaster drag insert kit available?
Rob

Three se7ens

Ill have a couple of the 500 kits this week as well.  Ill get a final count when I get all the parts back.

otghoyt

#23
Outstanding.  My hope is renewed.  I would also appreciated greatly if you did have the CF friction plates available.  I would make my own only to insure I could get my hands on your Jiggly inserts.  

I would also like one of your #4, counter balanced, SS, crank arms w/6mm handle hole for a Jigmaster and please send me a PM with bill.  Billing me today is fine as I'm aware that you drill handle holes upon customer order.

Lastly I need to purchase, 10 Derlin, under gear washers for the 114H, along with 3 of your thick top washers for for the 114H stack.

Thank you,

Hoyt

rjones

I would like a jigmaster insert kit as well as a fine thread star drag
Rob

Yogi_fish808

Sign me up for 2 jigmaster drag kits please. Can't wait to give them a try!

Pacific Viking

#26
I would like 3 jigmaster kits when available.  sign me up if there is a surfmaster edition!

GoldenRage

Hi Adam,

I'm interested in 2 jigmaster kits also. Let me know if they are available.
Feel free to PM me.

Best,
Victor

Three se7ens

#28
Quote from: GoldenRage on August 02, 2018, 03:06:01 PM
Hi Adam,

I'm interested in 2 jigmaster kits also. Let me know if they are available.
Feel free to PM me.

Best,
Victor


They havent been available aside from a few testers yet.  Im working on a production run though, they will be available soon.

GoldenRage

Hi Adam,

Understood ........... just checking

Thxs,
Victor