alan tani @ alantani.com fishing reel repair rebuild tutorial Bryan's Penn Spinfisher 5 Stack Kit
Reel Repair by Alan Tani
October 20, 2019, 03:31:55 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Bryan's Penn Spinfisher 5 Stack Kit  (Read 992 times)
0 Members and 1 Guest are viewing this topic.
handi2
Sensei
Member
***
Online Online

Posts: 3416


OCD Reel Service and Repair


« on: February 19, 2018, 03:01:09 PM »

This picture is of Bryan's 5 stack for the Penn Spinners. I'm showing this because what you see is after 2 seasons of charter boat use. They were cleaned out and put back in service. No better test than this.

The wear on the spool was from his old style drag knob I replaced last time it was here. The new drag knobs do make a difference in the drag range.

Keith


* IMG_4827.JPG (3062.51 KB, 3264x2448 - viewed 121 times.)

* IMG_4828.JPG (1984.24 KB, 3264x2448 - viewed 119 times.)
Logged

OCD Reel Service & Repair
Gulf Breeze, FL
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Offline Offline

Posts: 10272


The Reel Whisperer


« Reply #1 on: February 19, 2018, 04:41:01 PM »

Hi Keith,

Was the wear on the top of the spool there before?  Do I need to increase the drag stack a little by maybe providing 1 or 2 HT-100 drag washers or Carbontex to replace 1 or 2 of the thin Carbontex?

Thank you for your feedback. There are always room for improvements.

Bryan
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Rivverrat
Member
*
Online Online

Posts: 2233



« Reply #2 on: February 19, 2018, 05:08:33 PM »

 Cool this overall looks good... Jeff
Logged
handi2
Sensei
Member
***
Online Online

Posts: 3416


OCD Reel Service and Repair


« Reply #3 on: February 20, 2018, 07:44:27 AM »

Bryan the wear on top of the spool was there when I first got the reel. It was from the old drag knob. The height of the stack is perfect. Any higher the ring wouldn’t fit and the top metal washer wouldn’t go down enough to catch the spool shaft.
Logged

OCD Reel Service & Repair
Gulf Breeze, FL
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.198 seconds with 18 queries.