alan tani @ fishing reel repair rebuild tutorial Penn Spinfisher V 7500 rotor question
Reel Repair by Alan Tani
May 27, 2020, 09:46:34 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search Login Register  
Pages: [1]   Go Down
Author Topic: Penn Spinfisher V 7500 rotor question  (Read 386 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline

Posts: 3

« on: May 15, 2018, 09:54:40 AM »

Recently the rotor on my Spinfisher V 7500 has started rotating backwards about 1/4" after I stop reeling. It does it every single time and it always rotates backwards the same distance. Everything else on the reel seems to be functioning correctly. I took it apart to look at the anti-reverse clutch, but it looks fine to me (no sand/corrosion etc.). Has anyone ever experienced this before and know what the cause/fix may be?

Offline Offline

Posts: 3461

OCD Reel Service and Repair

« Reply #1 on: May 15, 2018, 03:57:16 PM »

I would first say to check the rotor nut but you have taken care of that. The clutch bearing may be worn a bit or too much grease. If the reel is well used I would replace the clutch bearing and inner sleeve.


OCD Reel Service & Repair
Gulf Breeze, FL
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.367 seconds with 19 queries.