Reel Speed Bearing Puller

[Cadman]

So I see this tool (bearing puller) and I am wondering if I need one. I mainly clean bass baitcasting reels and there are times when the bearings are stuck in the side plate. With that said, is this tool the solution for these type of bearings, or is this tool for really big bearings. I am looking for an easier way to get these bearings out without trying to pry them out with a pick. Any help will be appreciated, or if you have a better way to solve my dilemma. Pardon my ignorance on this tool, but how does this really work. Thank You in advance

[handi2]

If you can get a set of Reelspeed bearing pullers do it. The smaller the bearing the more you need these. The larger bearings are easier to get out with other tools.

The 1/8" and 3mm size is the most used in my set.

[Cadman]

If you can get a set of Reelspeed bearing pullers do it. The smaller the bearing the more you need these. The larger bearings are easier to get out with other tools.

The 1/8" and 3mm size is the most used in my set.

Thank You fore the help and info. One other thing. Do you have a model number of the set that I should get, and/or a place to buy the set. A website link would work also.

Thanks Again for the reply.

[FFisher]

Hi,
Does anyone know if these (Bearing Puller sets) are still available?
I got no reply from Reel Speed

[swill88]

They were available on Amazon maybe 6 months ago. The description and pricing were not very clear so I ended up returning everything. Priced too high for me.

[Whit]

Does not seem to be available anymore.  Too bad!  Anyone know of an alternative?

[ReelClean]

http://alantani.com/index.php?topic=24920.15