TLD 50 II LRS, no freespool after I tinkered with it

Started by trentless, June 20, 2018, 07:17:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

trentless

HELP NO FREE SPOOL
Just finished servicing my TLD 50 II LRS and don't have ANY freespool.  I always set cam to free on ALL conventional reels b4 servicing but am stumped and can't figure this out. Have tried over and over re-setting cam. My TLD 25 came out perfect with amazing freespool after similar service and reelX applied to bearings.

Anyone have this sort of "pilot error" or any advice??

Come in Alan, we have a problem!!

FatTuna

#1
Sounds like a spacing issue to me.

Did you tinker with the washers in the spool at all? Parts TT 0040?

Check out the cross pin (TT 0036) and make sure it's seated in the tail plate.

I'd pull the lever and drag cam off and rebuild the whole assembly.

Schematic: http://schematics.mikesreelrepair.com/albums/shimano/Shimano_TLD2S50LRSA_Schematic.pdf

alantani

yeah, just check it against the schematic......    :-\
send me an email at alantani@yahoo.com for questions!