2009 Stella 5000SW Parts

Started by exp2000, August 02, 2018, 05:55:11 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

exp2000

Hi, I need the following parts for a 2009 Stella 5000SW:

RD12343      Bail Arm                               Must have

RD12345      Set Screw

RD11660      Roller Clutch Water Proof

These parts are not available here in Australia.

They may be available in the USA but I might need help with shipping to Australia.

Can anyone help please?

Regards,
Brett

exp2000

This is the problem:

The set screw was seized so tight that the bail arm that the hex bit sheared off inside.

If I could extract the bit at least I would have the option of drilling out the set screw.
~

ReelClean

Only thing I could think of Brett would be to get a socket of the right size, grind it off perfectly square on the end and try and get that piece of key to turn clockwise and perhaps loosen up enough to get a strong magnet to fish it out.  Is there enough left to get a ground off socket on?
Specialist Daiwa reel service, including Magseal.

foakes

#3
When I run into these issues — the most successful remedy has been a GOOD pair of Vise-Grips with a flat and well meshing grabber tip.

If there is enough meat left on that hex bit — just get the vise grips on it solidly — it should loose enough to get it off.  Then the screw can be drilled and extracted.

We have all been here.

It just takes a careful approach with the right tool.

Believe it or not, these 10" locking wrench vise grips on the right have the flat and best meshing grip for small bits.  

Also, the tiny pair of ignition channel lockers on top right is invaluable for many, many reel jobs.  It is a Craftsman bought on sale for about $5 around 20 years ago.  And has proven its worth hundreds of times over.

If you don't already have it out — good luck, and keep us posted.

Best,

Fred
The Official, Un-Authorized Service and Restoration Center for quality vintage spinning reels.

D-A-M Quick, Penn, Mitchell, and ABU/Zebco Cardinals

--------

The first rule of fishing is to fish where the fish are. The second rule of fishing is to never forget the first rule.

"Enjoy the little things in Life — For someday, you may look back — and realize that they were the big things"
                                                     Fred O.

exp2000

#4
Thanks for the replies guys but there is nothing at all to latch onto.

I used some Dremel diamond bits to grind the locking screw out but now the support post screw is also seized so I am back to square one.

Looks like I will have to make a lateral cut through the roller and support post to have any chance of disassembly but if I cannot get parts, I will just have to leave it as is.

I have now updated my parts list in my original post.
~

ReelClean

I guess you have tried direct heat and tightening on that screw to crack it?
Specialist Daiwa reel service, including Magseal.

exp2000

#6
Quote from: ReelClean on August 04, 2018, 09:51:25 AM
I guess you have tried direct heat and tightening on that screw to crack it?

There is no turning back should you melt plastic bushes and some spares are still in question.
~

Wolli

#7
Hi, can get the small parts from a local dealer (in Hamburg, Germany).
The Bail Arm is not in stock, but will check on Monday with Shimano Europe Service Centre (Netherlands).

RD12343      Bail Arm                               Must have

RD12350      Line Roller Support Post        Must have    EUR  3.00

RD12344      Screw                                  Must have    EUR  3.95

RD12345      Set Screw                                               EUR  1.50

RD11660      Roller Clutch Water Proof                          EUR  4.50

Keep you postet.

Rgds. Wolli
love jigging    www.jupiter-sunrise-lodge.com/de/
Authorized Jigging Master Service Partner (in Germany)

exp2000

Thanks heaps Wolli.

The Bail Arm would be a big score (fingers crossed).

Regards,
Brett.

Wolli

Hi Brett,

pls check your emails.

Mail from Shimano has arrived.


Wolli

love jigging    www.jupiter-sunrise-lodge.com/de/
Authorized Jigging Master Service Partner (in Germany)

ReelClean

Quote from: Wolli on August 20, 2018, 11:17:01 PM
Hi Brett,

pls check your emails.

Mail from Shimano has arrived.
Wolli

Ain't this place great?   ;D
Specialist Daiwa reel service, including Magseal.

exp2000

Quote from: Wolli on August 20, 2018, 11:17:01 PM
Hi Brett,

pls check your emails.

Mail from Shimano has arrived.


Wolli



Thanks Wolli,

Just been busy working on some car problems.

I promise I will respond this week though.

Thanks heaps. You are a real legend mate.
~