Jigmaster handles

Started by RamseyReelRepair, September 14, 2018, 10:05:39 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

RamseyReelRepair

Hey guys looking for a good place to get power handles for jigmasters 24-55. Any ideas?

West
Check out the website and gallery!
😎http://www.ramseyreelrepair.com😎

mikeysm

I use handles off of the 49 they fit and they are a little longer.

mo65

   Did you mean the #24-55? You can get those and many others from Mystic Reel Parts.

            https://www.mysticparts.com/PennParts/Handles/TypeA.aspx
~YOU CAN TUNA GEETAR...BUT YOU CAN'T TUNA FEESH~


Maxed Out

Quote from: mo65 on September 16, 2018, 04:42:32 PM
   Did you mean the #24-55? You can get those and many others from Mystic Reel Parts.

            https://www.mysticparts.com/PennParts/Handles/TypeA.aspx

Mystic parts is the place to buy them.... I prefer the 24-56 for jigmaster. It has 3 mounting positions and same knob as a stock 113h. For $20 it's a no brainer
We Must Never Forget Our Veterans....God Bless Them All !!

RamseyReelRepair

Thanks I didn't see this when I was looking. Also I would like to find some in other colors with maybe T-Bar knobs.
Ideas?

West
Check out the website and gallery!
😎http://www.ramseyreelrepair.com😎

RowdyW

#5
Colored handle arms & T bar handles available from Black Pearl & Maxed Out. T bar knobs also available from Alan T & on ebay & Amazon. Got to search. Lots out there.

FatTuna

#6
I have these three. At least one other that's installed on a 500. Might have some more downstairs, will have to check.

Part is #24-56. They are type A. Fits a 500, 501, 506, 505, 112H, etc.

If you're interested, I will list them up in the for sale section.  

Alto Mare

#7
Quote from: RamseyReelRepair on September 14, 2018, 10:05:39 PM
Hey guys looking for a good place to get power handles for jigmasters 22-55. Any ideas?

West
Has to do with what you're going after, custom work gets expensive.

I would start here:
http://alantani.com/index.php?topic=12786.msg126397#msg126397
http://alantani.com/index.php?topic=12785.msg126385#msg126385
Lou makes custom knobs and handles, but he might have a long list:
http://alantani.com/index.php?topic=23861.msg265452#msg265452
As Ted mentioned these are also nice and reasonable in cost
https://www.mysticparts.com/PennParts/Parts/24-56.aspx
If you needed to have a custom knob instead, I could make you these:
http://alantani.com/index.php?topic=26485.msg301359#msg301359
They're a lot of work, it would probably be $80 for a complete handle shipped in the US, haven't really thought about it yet.

You could also try these...I'm not sure if Ted is still offering them:
http://alantani.com/index.php?topic=25112.msg282536#msg282536
another option is here, but you will need to order the knob separately:
http://alantani.com/index.php?topic=11661.msg113140#msg113140
These are also nice and reasonable:
https://squareup.com/store/pro-challenger-llc/item/offset-handle-arm-for-penn-h-jigmaster-other-penn-reels
he sells the round knob and T knob as well :
https://squareup.com/store/pro-challenger-llc/item/aluminum-hnadle

All of this information is here on our site, you just need to look for it.

As you could see, possibilities are endless...good luck!


Sal



Forget about all the reasons why something may not work. You only need to find one good reason why it will.

RamseyReelRepair

Awesome sal thanks for that!

West
Check out the website and gallery!
😎http://www.ramseyreelrepair.com😎