alan tani @ alantani.com fishing reel repair rebuild tutorial Shimano torsa
Reel Repair by Alan Tani
November 15, 2019, 05:20:03 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Shimano torsa  (Read 2205 times)
0 Members and 1 Guest are viewing this topic.
kiwi caster
Member
*
Offline Offline

Posts: 2


« on: March 11, 2009, 12:11:04 AM »

Have been asked to have a look at one of these reels .
The owner is looking for a smoother start up and to decrease a bit of cranking  resistance when at higher drag settings.( seems to be a common lever drag trait from reading here ). Have you had one of these reels apart ? and can you offer any tips either in the different cams or in the beveled washer set up.

Also hows the extreme reel lube holding up for you?

Thanks Neil
Logged
alantani
admin
Administrator
Member
*****
Offline Offline

Posts: 17815



« Reply #1 on: March 12, 2009, 03:28:22 AM »

i'm not going to be of much help here.  never had one apart.  no one i fish with has that kind of money! 

the handle load under heavy drag can sometimes be worsened if the right main side plate bearing is bad.  i think you may have simply hit the limit of bearing and that the bearing is fine.  by start up, you mean the stickiness of the drag washer, right?  it should be greased carbon fiber.  it doesn't get much better than that.  alan
Logged

send me an email at alantani@yahoo.com for questions!
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.26 seconds with 17 queries.