alan tani @ alantani.com fishing reel repair rebuild tutorial Penn 750SS Line will not retrieve evenly on the spool
Reel Repair by Alan Tani
February 22, 2019, 04:39:36 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Penn 750SS Line will not retrieve evenly on the spool  (Read 140 times)
0 Members and 1 Guest are viewing this topic.
Fishinggut
Member
*
Offline Offline

Posts: 4


« on: February 03, 2019, 12:27:23 PM »

I have a Penn 750SS that the line will bunch up when retrieved back onto the spool.   The line will bunch up on the outer part of the spool.  Any idea what could be causing this and any quick fixes?
Logged
handi2
Sensei
Member
***
Online Online

Posts: 3331


OCD Reel Service and Repair


« Reply #1 on: February 03, 2019, 12:33:35 PM »

First check to see if the white thrust washer is on the spool shaft or stuck to the bottom of the spool.

Then watch the spool as you turn the reel handle. The spool should evenly rise up and down as you turn the handle. If it is not rising up and down evenly there is a problem with the crosswind gear or crosswind block inside the reel.

I will post a schematic in a few minutes.

Keith

http://www.mysticparts.com/Assets/images/pennparts/schematics/7500ss.pdf

"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"
« Last Edit: February 04, 2019, 08:36:07 AM by mizmo67 » Logged

OCD Reel Service & Repair
Gulf Breeze, FL
Penn
Webmaster
Member
****
Offline Offline

Posts: 176


« Reply #2 on: February 04, 2019, 03:27:15 AM »

Are you using braid or mono?  Good info there from Keith as well.

tony
Logged
Alto Mare
Moderator
Member
****
Online Online

Posts: 12010


Southeastern Pennsylvania


« Reply #3 on: February 04, 2019, 03:48:27 AM »

Good advice above.
Usually when the line bunches up on the spool, it's just a matter of adding a shim on the bottom of the existing thrust washer.
If you take a look at the bottom of the spool, you should notice a really shiny spot where the thrust washer rides, that's a clear indication that the spool has worn a little...it doesn't take much.

I would start there, if that doesn't help I would follow the two gentlemen advice above.

Sal
Logged

Forget about all the reasons why something may not work. You only need to find one good reason why it will.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.184 seconds with 17 queries.