How much Tsi 321

Started by Chuck750ss, February 04, 2019, 11:25:13 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

MarkT

I use a drop of 321.  I pass on the 301 because it's 321 with a solvent to dissolve whatever is left in the bearing.  If 321 is too thick cut it with some IPA.
When I was your age Pluto was a planet!

RowdyW

Joe, 301 is the one that contains solvent not 321.       Rudy

Tiddlerbasher

321 is the oil - 301 is oil plus solvent.

Reel 224

#18
Quote from: RowdyW on February 05, 2019, 07:04:37 PM
Joe, 301 is the one that contains solvent not 321.       Rudy

Rudy; I always get confused between the 321 & 301 dam! I'm sorry guys :-[

Joe

PS; I removed that stupid post
"I don't know the key to success,but the key to failure is trying to please everyone."

Gman_WC

Quote from: Keta on February 05, 2019, 06:10:43 PM
Do you have a MSDS on the red grease?

I'm not sure Lee. It's a red grease that's made in Germany. I've tried
to look up the name and numbers on the container. I'll send you a picture when I get home. It has a strong smell like Kroil.
-gary
Walnut Creek, CA

RowdyW

Quote from: Reel 224 on February 05, 2019, 09:49:25 PM
Quote from: RowdyW on February 05, 2019, 07:04:37 PM
Joe, 301 is the one that contains solvent not 321.       Rudy

Rudy; I always get confused between the 321 & 301 dam! I'm sorry guys :-[

Joe

PS; I removed that stupid post
Don't get bent out of shape Joe, we are all on a continual learning curve. This CRS is tough to get rid of.  ;D ;D           Rudy

conchydong

Quote from: RowdyW on February 05, 2019, 11:40:46 PM
Quote from: Reel 224 on February 05, 2019, 09:49:25 PM
Quote from: RowdyW on February 05, 2019, 07:04:37 PM
Joe, 301 is the one that contains solvent not 321.       Rudy

Rudy; I always get confused between the 321 & 301 dam! I'm sorry guys :-[

Joe

PS; I removed that stupid post
Don't get bent out of shape Joe, we are all on a continual learning curve. This CRS is tough to get rid of.  ;D ;D           Rudy


That's it. I concluded that the more I learn, I realize how much I really don't know.

Reel 224

Quote from: RowdyW on February 05, 2019, 11:40:46 PM
Quote from: Reel 224 on February 05, 2019, 09:49:25 PM
Quote from: RowdyW on February 05, 2019, 07:04:37 PM
Joe, 301 is the one that contains solvent not 321.       Rudy

Rudy; I always get confused between the 321 & 301 dam! I'm sorry guys :-[

Joe

PS; I removed that stupid post
Don't get bent out of shape Joe, we are all on a continual learning curve. This CRS is tough to get rid of.  ;D ;D           Rudy

I know. ;D ;D

Joe
"I don't know the key to success,but the key to failure is trying to please everyone."

oc1

Quote from: RandyMFoster on February 05, 2019, 11:13:15 AM
Removing the sheilds you need to be alittlebit more carefull not to damage the bearing sometimes on very small bearings once I have the retaining rings removed I will use a light burst of compresseed air to avoid damaging the race to remove the sheilds. 
I don't know this for a fact, but suspect it is the bearing cage that gets damaged first.  If the cage is bent then it is going to pinch the ball.  Personally, I don't try to remove shields unless the bearing is substandard after cleaning and there is nothing else to loose.  If it is a good bearing then I don't mess with the shield.  Just soak it in naphtha to get rid of the old oil and sludge. Spin and blow dry.  Then add new oil.
-steve

RandyMFoster

Thank you oc you are correct. Also thank you exp 2000 for explaining that far better then I could.. I may have. Justmade it harder to understand.  :-\ also wow I had no idea tsi 301 was just a solvent variation I thought it had different chemical properties.

gstours

My IPA has been dry hopped,  is this ok?   Just wondering?🤷‍♂️

mo65

Quote from: gstours on February 08, 2019, 04:44:51 PM
My IPA has been dry hopped,  is this ok?   Just wondering?🤷‍♂️

    Hmm...Gary...I just had a vision of you cutting 321 with a cold beer...now there's a good video! ;D
~YOU CAN TUNA GEETAR...BUT YOU CAN'T TUNA FEESH~


Tiddlerbasher


Brewcrafter

I guess I wasn't the only one that had to think twice (or 3 times) about actually applying IPA to my reel parts   :D  Started to wonder if going to DIPA would really improve my reel performance!

philaroman

#29
Quote from: Tiddlerbasher on February 09, 2019, 01:08:54 AM
If it's got hops drink it ;D

Mommy, why is that scary man drinking a bunny?   :o
sorry, that's the image I got  ...and I have to live with me


Quote from: Brewcrafter on February 09, 2019, 01:51:49 AM
I guess I wasn't the only one that had to think twice (or 3 times) about actually applying IPA to my reel parts   :D  Started to wonder if going to DIPA would really improve my reel performance!

sure, why not  ...and stout makes reels stronger  ;D ;D ;D