alan tani @ fishing reel repair rebuild tutorial Penn fierce 4000 II issue
Reel Repair by Alan Tani
August 23, 2019, 06:58:59 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search Login Register  
Pages: [1]   Go Down
Author Topic: Penn fierce 4000 II issue  (Read 198 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline

Posts: 12

« on: February 13, 2019, 07:18:00 PM »

Took the reel apart cleaned it up and reassembled it.  Noticed that it is really rough now.  Took it apart again and kept messing with it and determined that the main gear is rubbing on the crosswind block when it moves up behind the main gear.  What am I missing here?
« Last Edit: February 13, 2019, 07:19:14 PM by SwitcheS12 » Logged
Offline Offline

Posts: 68

« Reply #1 on: February 14, 2019, 02:01:40 AM »

It's a pretty odd problem to occur, I'd check for a few things:

1) Make sure the Oscillation gear is seated properly, as well as the crosswind block/spool shaft slider

2) You might be missing or have too much shim washers on the main gear shaft, usually on the left side of the reel as you're looking from the reel stem/foot. I don't remember if I've seen any shim washers on the right side for Penn, which is also the usual case for other brands. Though I've seen some reel which do have shims on the right side.
Online Online

Posts: 505

« Reply #2 on: February 14, 2019, 02:47:47 AM »

Check the that goes thru the slider, sometimes if it doesn't seat right it will scrub.
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.184 seconds with 17 queries.