alan tani @ alantani.com fishing reel repair rebuild tutorial SR 30 Drag Problems
Reel Repair by Alan Tani
December 06, 2019, 11:22:20 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: SR 30 Drag Problems  (Read 4962 times)
0 Members and 1 Guest are viewing this topic.
707Fisherman
Member
*
Offline Offline

Posts: 3


« on: March 17, 2009, 04:20:49 PM »

  Alan I am have n some issues with getting the drag to stay set where i put it .  what happens is I set it then pull some line out and the drag tightens I did every thing the Booklet said as far as making sure the rubber washer is well lube so it wont stick but it still dose! Do you have a CURE DOC ??

Thanks in advance Gary
Logged
alantani
admin
Administrator
Member
*****
Online Online

Posts: 17852



« Reply #1 on: March 17, 2009, 08:08:51 PM »

if you have a star drag or standard 3 stack spinning reel, then this will happen if you've reversed the order of the last two metal washers in the drag stack.  if you have an accurate sr 30 spinning reel, this would not apply.  somehow, the preset knob of you accurate is in direct contact with the spool so that it turn when your spool turns.  has anyone had this reel apart?  alan

« Last Edit: March 17, 2009, 08:36:03 PM by alantani » Logged

send me an email at alantani@yahoo.com for questions!
707Fisherman
Member
*
Offline Offline

Posts: 3


« Reply #2 on: March 18, 2009, 05:38:48 AM »

Yes The reel has come apart before as it is My cousins reel and not mine but he gave it to me to see if I knew anybody that could fix it with out have n to wait on Accurate Sad Lucky me LOL !!  as far as the drag gose he was only able to mess up the # 82 disc spring washer orientation which when i took it apart was ))) I went on Acc web site they have it clear that it should be ()( that was it ! But for some reason It still catches and turns the drag shaft nut which in turns  means a whole lotta DRAG !!!!!


Sorry for posting this ? in the welcome fourm but I didnt know where else to post it.  My bad LOL
Logged
alantani
admin
Administrator
Member
*****
Online Online

Posts: 17852



« Reply #3 on: March 18, 2009, 09:12:37 AM »

here's the schematic for the sr 30 http://accuratefishing.com/pdfs/sr_30_50_ipb.pdf  somewhere inside there are parts out of order or even parts missing.  you can lay things out, take photos and get those photos to accurate and they should be able to help.  e-mail them to me as well and i will take a look, though i've never had one of these apart before.  it looks fairly straight forward.  i don't mean to sound like an old cynic, but my first guess is that someone dropped a washer on the floor and didn't notice. 
Logged

send me an email at alantani@yahoo.com for questions!
707Fisherman
Member
*
Offline Offline

Posts: 3


« Reply #4 on: March 18, 2009, 05:04:46 PM »

HEY I was think n the same thing But After a call to Todd at Benicia Bait He said he had one do the same thing.  I drove down and watched him do his thing.  All Parts were there he Scratched his head and Ding Light BULB went off then he went on to tell me that in order to set the drag.  You have to back off the preset lock. Then turn the preset knob sub assembly counter clock wise about half a turn.Then tighten the preset lock.  pull some line n repeat until you get the drag Pressure you want !! thanks for the Replys Brotha !!!  Grin now i have to go ply with my sr 12 n b2-30 lol !!   
Logged
alantani
admin
Administrator
Member
*****
Online Online

Posts: 17852



« Reply #5 on: March 19, 2009, 07:48:49 AM »

glad it was simple!  i'm going to have to get one of those and play around with it.  nice reel!  alan
Logged

send me an email at alantani@yahoo.com for questions!
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.405 seconds with 20 queries.