Need help on how to disassemble ryoga 1520 2018 model

Started by DevilZ, April 01, 2019, 12:39:45 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

DevilZ

Hi fellow anglers, I recently encounter a problem when I wanted to open up my ryoga 2018 model. It does seems want to be disassembled. I took out the 2 screw holding the frame but was unable to pull it apart. I believe there is a hidden catch or wat not. So was asking if anyone got any luck in opening their ryoga. Thanks


nelz

Did you undo that screw on the lower left in the photo?

exp2000


DevilZ

Hi thanks for the reply, I do have the schematic on have but just couldn't figure out how to open it. It's secure by 2 screw one front one back, after taking out both seem to be stuck. Even try using a plastic pry tool to open but just can't get it open.

exp2000

Daiwas can be tricky sometimes.

You might have a lot better chance of success if you post some pictures showing the screws.

If this is not possible quote part numbers from the schematics.
~